Summary of Contents for Busy Bee tools Deluxe Pro Bandsaw Fence
Page 1
Bandsaw Fence BBPBSFENCE User’s Manual User’s Manual NO PORTION OF THIS MANUAL MAY COPYRIGHT 2024 BY BUSY BEE TOOLS LTD. BE REPRODUCED WITHOUT THE WRITTEN CONSENT OF BUSY BEE TOOLS LTD. v1.0 NO PORTION OF THIS MANUAL MAY COPYRIGHT 2024 BY BUSY BEE TOOLS LTD.
Page 2
General Shop Safety Instructions Notice: Safety First! The paramount concern in operating this equipment is safety. It is imperative to adhere strictly to the following instructions. Neglecting any of the listed guidelines may lead to risks such as electric shock, fire hazards, or severe personal injury.
Page 3
Introduction It is with distinct honor and excitement that we present to you the BBPBSFENCE Busy Bee Tools Professional Band Saw Fence, a premier addition to our esteemed line of precision woodworking equipment. At Busy Bee Tools, we are committed to engineering excellence, and this fence exemplifies our dedication to providing craftsmen with superior tools for their trade.
SPECIFIC SAFETY INSTRUCTIONS 1. Before beginning the assembly process, make sure the machine is unplugged and the power switch is in the OFF position. 2. If you are not familiar with the operation of the machine, seek assistance from a qualified individual. 3.
ASSEMBLY INSTALLING THE FRONT RAIL TOOLS REQUIRED: To install the new front rail on the table’s front skirt, ensure that the two mounting holes are 14mm (9/16”) or larger in • 16mm (5/8”) or adjustable wrench diameter, and follow the dimensions outlined in Figure 1. •...
Figure 2 RIP FENCE ASSEMBLY With the front rail loosely in place, begin assembling the fence carrier and fence onto the rail. Make any final adjustments by ensuring the fence rests evenly along its entire length on the table and moves smoothly across the table’s width.
Page 7
ADJUSTING THE FENCE TO 90° ADJUSTING THE RIP FENCE FOR DRIFT To ensure the fence is perpendicular to the table use an Bandsaw Rip Fence System from Busy BBPBSFENCE appropriate square. If the fence is not at a 90-degree Bee Tools includes a cutting-edge fence carrier designed to angle, adjust either side of the Guide Rail by raising or effortlessly adjust and eliminate ‘drift,’...
Page 8
ADJUSTING THE FENCE ON THE CARRIER SWITCHING THE FENCE FROM LEFT TO RIGHT The fence can be easily adjusted from a vertical to a To move the fence from the left side of the carrier to the horizontal position, or switched from mounting on the left right side, allowing you to use the rip fence on the right of side of the blade to the right.
Page 9
RE-SAWING Re-sawing is a critical operation for cutting thicker wood pieces into thinner boards, veneers, or slices, allowing for more efficient use of material and creating matching grain patterns. The BBPBSFENCE includes a re-saw guide bar (#15) designed to correct any blade wandering that may occur during re-sawing operations.
Page 10
BBPBS Fence Assembly Diagram and Parts List...
Parts List Item # Part Number Description Qty. PBBPBS18601 Adjust Handle PBBPBS18602 Locking Knob PBBPBS18603 Screw - Soc Head Cap M8-1.25 X 10 PBBPBS18604 Cam Eccentric PBBPBS18605 Washer - Flat PBBPBS18606 Nut - Hex M10-1.5 PBBPBS18607 Round handle PBBPBS18608 Washer M8 PBBPBS18609 Rip fence carrier PBBPBS18610...
Page 12
This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etc. Busy Bee Tools shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to property or for incidental contingent, special or consequential damages arising from the use of our products.
Need help?
Do you have a question about the Deluxe Pro Bandsaw Fence and is the answer not in the manual?
Questions and answers