La Crosse Technology 513-1211 Quick Start Manual

ATO M I C D I G I TA L C LO C K
MODEL: 513-1211
DC: 013124
Find more product information and support here:
POW ER U P
1. Insert 3-AA batteries into your Atomic Clock.
2. Complete Basic Settings.
W W VB ATOM IC TI M E SI GNAL
• After an initial search, the clock will automatically search for the
WWVB Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and
11:00.
• The Atomic Time Signal Icon
be solid when connected.
• Hold the WAVE/+ button anytime, to manually search for the
Atomic Time Signal.
For information about WWVB Atomic Time visit:
bit.ly/laxtech_support
will flash while searching, and
bit.ly/AtomicTime
Page 2
SE T T I N G S
1. Hold the SET button to enter the Settings Menu.
2. Press the WAVE/+ or DST/- button to adjust values.
3. Press the SET button to confirm and move to next item.
Settings Menu Order:
• 12/24 Hour
• Hour
• Minutes
• Year
Note: Weekday will set automatically
• Month
when Year, Month and Date are set.
• Date
• Fahrenheit/Celsius
T I M E ZO N E
• Slide the Time Zone Switch on the back to your correct time
zone: EST = Eastern, CST = Central, MST = Mountain, PST = Pacific
DAY LI GH T SAVI N G T I M E I N D I CATO R
• Hold the DST button to activate or deactivate the DST Indicator.
• The letters DST will show above the seconds to indicate the
indicator is on, and the clock will automatically change for
Daylight Saving Time.
Page 3