Dell 7330 User Manual page 99

Printing Envelopes from the Optional Envelope Tray
Caution:
Insert the Envelope Tray in the slot for Tray 2 only. Inserting the Envelope Tray in
any other tray slot will damage it.
Auto Sense should never be selected in the Tray 2 size menu when the Envelope Tray is in the
printer because it does not auto-sense any size.
1.
Insert the envelopes in the Envelope Tray:
■ Place Monarch, #10, A6, C5, DL, Large US Postcard, and custom-sized envelopes
long-edge feed in the tray.
■ Place the side to be printed faceup.
■ Place the envelope with the flap entering the printer first (left side of tray).
2. Adjust the paper guides to the size of the envelopes.
3. If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a. Select
Change setup
b. For Monarch, #10, C5, and DL envelopes select
Postcard paper select the appropriate paper type. Press the OK button.
c.
Select the paper size, and then press the OK button to save your selection. For
information on printing envelopes in sizes not listed in the menu, see
Custom Size Paper
4. In the printer driver, select Envelope as the paper type or Tray 2 as the paper source.
, and then press the OK button.
on page 4-45.
Dell 7330 Mono Laser Printer
4-40
Printing on Specialty Media
7330-203
, and for A6 and Large US
Envelope
Printing on