Dell 7330 User Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. All in One Printer
  5. 7330
  6. User manual

Dell 7330 User Manual

Mono laser printer
Hide thumbs Also See for 7330:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual, Quick User Manual
7330 Mono Laser Printer

User Guide

www.support.dell.com

Advertisement

Table of Contents
loading

Related Manuals for Dell 7330

Summary of Contents for Dell 7330

  • Page 1: User Guide

    7330 Mono Laser Printer User Guide www.support.dell.com...
  • Page 2 Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

  • Page 3: Table Of Contents

    Printer Clearance........
  • Page 4 Manually Setting the Printer’s IP Address ....... . . 3-8...
  • Page 5 Paper that May Damage Your Printer........
  • Page 6 Changing Printer Language ........
  • Page 7 Additional Resources............6-71 Dell 7330 Mono Laser Printer...
  • Page 8 Moving the Printer Within the Office ........

  • Page 9: User Safety

    ■ Symbols Marked on Product on page 1-9 Your printer and the recommended supplies have been designed and tested to meet strict safety requirements. Attention to the information in this chapter will ensure the continued safe operation of your printer.

  • Page 10: Electrical Safety

    Call an authorized service representative to correct the problem. The power cord is attached to the printer as a plug-in device at the back of the printer. If it is necessary to disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.
  • Page 11 Liquid is spilled into the printer. ■ ■ The printer is exposed to water. If any of these conditions occur: Turn off the printer immediately. Disconnect the power cord from the electrical outlet. Call an authorized service representative. Dell 7330 Mono Laser Printer Electrical Safety...

  • Page 12: Laser Safety

    With specific regard to lasers, this printer complies with laser product performance standards set by governmental, national, and international agencies and is certified as a Class 1 Laser Product. The printer does not emit hazardous light because the beam is totally enclosed during all modes of customer operation and maintenance.

  • Page 13: Maintenance Safety

    Do not use aerosol cleaners. The use of supplies that are not approved may cause poor performance and could create a hazardous condition. ■ Do not burn any consumables or routine maintenance items. For information on Dell supplies recycling programs, go to www.dell.com/recycling. Dell 7330 Mono Laser Printer...

  • Page 14: Operational Safety

    Printer Location Place the printer in a dust-free area within a temperature range of 41° F to 90° F (5° C to 32° C) and a relative humidity range of 15 percent to 85 percent. Printer Clearance Place the printer in an area where there is adequate space for ventilation, operation, and servicing.

  • Page 15: Operational Guidelines

    Place the printer on a level, solid non-vibrating surface with adequate strength for the ■ weight of the printer. It should be within 2° of horizontal with all four feet in solid contact with the surface. The base printer weight without any packaging materials is approximately 41 kg (90 lb.).

  • Page 16: Moving The Printer

    ■ Always use two people to lift the printer. ■ Always turn off the printer using the power switch and unplug all cables and cords. ■ Always lift the printer from the designated lift points. Do not place any food or liquids on the printer.

  • Page 17: Symbols Marked On Product

    See the manual(s) for information. Hot surface on or in the printer. Use caution to avoid personal injury. Do not burn. It may take 40 minutes or more for the fuser to cool down depending on your printer model. Dell 7330 Mono Laser Printer...

  • Page 18: Printer Features

    Printer Features This chapter includes: ■ Parts of the Printer on page 2-2 ■ Printer Configurations on page 2-4 Control Panel on page 2-7 ■ ■ Fonts on page 2-10 ■ More Information on page 2-12 Dell 7330 Mono Laser Printer...

  • Page 19: Parts Of The Printer

    ■ ■ Internal Components on page 2-3 Front View Rear View Dell 7330 Mono Laser Printer Tray 1 (MPT) Duplex Unit Standard Output Tray Optional 3500-Sheet Finisher or Stacker Two 500-Sheet Feeders (Trays 2 and 3) Optional 1000-Sheet Feeder (Trays 4 and 5)

  • Page 20: Internal Components

    Internal Components Dell 7330 Mono Laser Printer Fuser Transfer Roller Drum Cartridge Toner Cartridge 7330-109 Parts of the Printer...

  • Page 21: Printer Configurations

    Control Panel Features on page 2-7 Standard Features The Dell 7330 Mono Laser Printer embodies many features to meet your print needs: Great performance and superior print quality ■ True 1200 x 1200 dpi and 600 x 600 dpi at 50 pages per minute (ppm) (Letter and A4) 256 MB of RAM standard, expandable to 1 GB ■...

  • Page 22: Available Configurations

    Available Configurations The Dell 7330 Mono Laser Printer is available in one configuration. Features Memory PostScript and PCL Fonts 1000-Sheet Feeder 2000-Sheet Feeder 3500-Sheet Stacker 3500-Sheet Finisher Automatic 2-Sided Printing (Duplex) Maximum Resolutions (dpi) Secure, Proof, Personal, Personal Saved, Saved Print Jobs, and Print...

  • Page 23: Options And Upgrades

    Options and Upgrades Printer options and an upgrade are available for the Dell 7330 Mono Laser Printer. Options ■ 512 MB memory cards for two RAM slots ■ 1000-Sheet Feeder ■ 2000-Sheet Feeder ■ 3500-Sheet Stacker ■ 3500-Sheet Finisher (with stapler and hole puncher) ■...

  • Page 24: Control Panel

    Prompts you to load paper (if enabled; Tray 1 MPT enabled by default), replace supplies, and clear jams. ■ Enables you to access tools and information pages to help resolve problems. ■ Enables you to change printer and network settings. Dell 7330 Mono Laser Printer Printing Ready to Print Control Panel , printer...

  • Page 25: Control Panel Layout

    There are a number of information pages accessible through the control panel. When the print icon appears before a title on the control panel display, press the OK button to print that page. Dell 7330 Mono Laser Printer Status Indicator LED: Green = Printer is ready to print.

  • Page 26: Menu Map

    Print the Menu Map to see other information pages available for printing. Information Pages Your printer comes with a set of information pages that helps you solve printing problems and obtain the best results from your printer. Access these pages from the printer’s control panel.

  • Page 27: Fonts

    You can list, print, and download PostScript, PCL, and TrueType fonts to your printer using the Dell Printer Font Management Utility. This utility helps you manage fonts, macros, and forms on a printer’s hard drive. Use the Software and Documentation CD to download and install the Font Management Utility.

  • Page 28: Printing Font Samples

    Select the Emulations folder on the left navigation panel. Select Font Files. Select either PostScript or PCL. Print the list of fonts from your browser. Dell 7330 Mono Laser Printer on page 2-11 , and then press the OK button to PostScript Font List...

  • Page 29: More Information

    More Information This section includes: ■ Resources on page 2-12 Obtain information regarding your printer and its capabilities from the following sources. Resources Information Installation Guide* Quick Use Guide* User Guide (PDF)* Video Tutorial Online Diagnostics Technical Support Information about menu selection or error...

  • Page 30: Network Basics

    3-25 This chapter provides basic information about setting up and connecting to your printer. Note: For information about setting up and connecting to your printer on an IPv6 network, IPv6 on page 3-25. Dell 7330 Mono Laser Printer...

  • Page 31: Overview Of Network Setup And Configuration

    Windows operating systems: Run the Installer on the Software and Documentation CD to automatically set the printer’s IP address if the printer is connected to an established TCP/IP network. You can also manually set the printer’s IP address on the control panel.

  • Page 32: Choosing A Connection Method

    If you are connecting to one or more computers with a hub, connect the computer to the hub with one cable, and then connect the printer to the hub with the second cable. Connect to any port on the hub except the uplink port.

  • Page 33: Connecting Via Usb

    1284-B [male] cable), with a maximum length of three meters (10 feet). Connect the Parallel cable to the printer and the computer while they are both Off, and then turn them On. Install the printer driver from the Software and Documentation CD, and select the appropriate LPT Parallel port.

  • Page 34: Configuring The Network Address

    Software and Documentation CD to detect or assign an IP address to your printer. For further instructions, insert the Software and Documentation CD into your computer’s CD drive. After the Dell Printer Installer launches, follow the prompts for installation.

  • Page 35: Dynamic Methods Of Setting The Printer's Ip Address

    You can turn on/off both protocols using the control panel, or use the Embedded Web Server to turn on/off DHCP. Note: You can view the printer’s IP address at any time. On the control panel, select , press the OK button, select Information OK button.

  • Page 36: Configuring The Network Address

    Click the DNS/WINS button. To enable DDNS, set the following: Dynamic DNS Registration - Set to Enabled. ■ ■ Hostname - Use the default name provided by Dell or enter another name. ■ Primary WINS Server (optional) ■ Secondary WINS Server (optional) Click Save Changes when you are finished entering the settings.

  • Page 37: Manually Setting The Printer's Ip Address

    If you are on a network without a DHCP server, or in an environment where the network administrator assigns printer IP addresses, you can use this method to manually set the IP address. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you are in a small office with a single PC and use a dialup modem connection, you can manually set the IP address.
  • Page 38 Embedded Web Server, click the Help button in the Embedded Web Server to go to the EWS Online Help. After setting the printer’s IP address, you can modify TCP/IP settings using the Embedded Web Server. Launch your web browser.

  • Page 39: Printer Management Software

    The Embedded Web Server (EWS) provides a simple interface to the embedded web server in any networked Dell printer that enables you to manage, configure, and monitor networked printers from your desktop. EWS gives administrators easy access to printer status, configuration, and diagnostic functions.

  • Page 40: Available Printer Drivers

    Available Printer Drivers To access special printing options, use a Dell printer driver. Dell provides drivers for a variety of page description languages and operating systems. The following printer drivers are available: Printer Driver Windows PostScript Driver PCL6 PCL5e Mac OS X (version 10.3 and...

  • Page 41: Windows 2000 Or Later

    Verify that the printer is receiving network information by monitoring the LEDs on the back of the printer or on the External Print Server. When the printer is connected to a functioning network and receiving traffic, its link LED is green, and its amber traffic LED is flashing rapidly.
  • Page 42 Select Standard TCP/IP Port from the New Port Type drop-down menu, and then click Next. Click Next. Enter the IP Address of the printer you want to use in the Printer Name or IP Address edit box. Click Next. Select one of these options: ■...
  • Page 43 Select the *.INF file, and then click Open. Verify that the path and filename are correct, and then click OK. Enter a name for the printer and select whether you want that printer to be the default. Click Next. Select one of these options: ■...
  • Page 44 Select the *.INF file, and then click Open. Verify that the path and filename are correct, and then click OK. Enter a name for the printer and select whether you want that printer to be the default. Click Next. Select one of these options: ■...

  • Page 45: Windows 64-Bit Server To 32-Bit Client Installation

    Choose your Printer, and then click Next. Select Intel Box for Windows XP, and then click Next. Click Finish. In the My Network Places dialog box, double-click the 64-bit system, and then select Yes. Dell 7330 Mono Laser Printer Windows 2000 or Later 3-16...

  • Page 46: Windows 2000 Or Later Troubleshooting

    Click Start, click Settings, and then click Printers. Right-click the printer icon, and then click Properties. Select the Advanced tab. Verify that the correct printer driver is installed. Select the Ports tab. Verify that the IP Address in the Print to the Following Ports list is identical to the one on the Configuration page.
  • Page 47 Printing a Test Page To print a test page: Select the General tab. Click Print Test Page. If the printer does not print, select Online Diagnostics Technical Support on the Troubleshooting tab of your Windows printer driver to access Online Diagnostics Technical Support.

  • Page 48: Macintosh Os X, Version 10.3 And Higher

    To install the printer driver from the Software and Documentation CD: Insert the CD into the CD drive and select the VISE installer to install the printer software. When installation is complete, open the Printer Setup Utility for Mac OS X, version 10.3.x.

  • Page 49: Macintosh Os X, Version 10.4

    Enter the printer’s IP address in the Printer Address field. Verify that the Queue Name field is blank. Select Dell from the Printer Model pull-down menu, and then select the corresponding PPD file. Click the Add button. The printer is added to the list.
  • Page 50 Select Dell from the list of manufacturers in the lower drop-down menu. Select the appropriate printer from the list of available printers. Click the Add button. USB Connection To install the printer driver from the Software and Documentation CD: Insert the CD into the CD drive.

  • Page 51: Macintosh Troubleshooting (Mac Os X, Version 10.3 And Higher)

    For AppleTalk, follow the steps below. For TCP/IP proceed to Step 5. From the printer’s control panel, verify that EtherTalk is enabled. If it is not, enable it in the control panel, and then reset the printer.

  • Page 52: Unix (Linux)

    UNIX (Linux) Your printer supports connection to a variety of UNIX platforms through the parallel and network interface. The workstations currently supported by EWS for UNIX/Linux to a network-connected printer are: ■ Sun Solaris ■ HPUX 11.0 ■ HPUX 11i ■...
  • Page 53 Click the Start button to begin downloading. Repeat steps 1 and 2, and then click the Printer Package for use with Services for Unix Systems link. Click the Start button to begin downloading.

  • Page 54: Ipv6

    Enabling IPv6 IPv6 can be enabled or disabled independently of IPv4. Note: If you disable both IPv4 and IPv6, you will lose your connection to the printer. For information on restoring the default TCP/IP settings, see on page 3-26. To enable/disable IPv6, use one of the following options: ■...

  • Page 55: Setting The Interface Id

    Your IPv6-enabled printer has one interface with multiple addresses. The Interface ID is the part of the address after the prefix. The printer uses the Interface ID when assigning both the Link-Local address and automatic addresses that use router supplied prefix(es). It is not used in addresses supplied by DHCPv6.

  • Page 56: Automatic Address Assignment

    Select the Protocols folder on the left navigation panel, and then click TCP/IP. Click the TCP/IP (v6) button. Select/deselect Use router supplied prefixes. Click the Save Changes button at the bottom of the page. Dell 7330 Mono Laser Printer 3-27 IPv6...

  • Page 57: Dhcpv6

    Select the Protocols folder on the left navigation panel, and then click TCP/IP. Click the TCP/IP (v6) button. Select/deselect the DHCPv6 options. Click the Save Changes button at the bottom of the page. Dell 7330 Mono Laser Printer 3-28 IPv6...

  • Page 58: Manual Address Assignment

    Select the Protocols folder on the left navigation panel, and then click TCP/IP. Click the TCP/IP (v6) button. In the Manual Address Assignment field, select Use this address, and then type the address. Click the Save Changes button at the bottom of the page. Dell 7330 Mono Laser Printer 3-29 IPv6...

  • Page 59: Address Precedence

    Select the Protocols folder on the left navigation panel, and then click TCP/IP. Click the TCP/IP (v6) button. In the Address Precedence field, select the desired option. Click the Save Changes button at the bottom of the page. Dell 7330 Mono Laser Printer 3-30 IPv6...

  • Page 60: Printing Basics

    ■ Creating Custom Paper Types ■ Using the Stapler on page 4-50 ■ Using the Hole Puncher on page 4-54 ■ Advanced Options on page 4-56 Dell 7330 Mono Laser Printer on page 4-33 on page 4-45 on page 4-49...

  • Page 61: Supported Paper And Media

    Your printer is designed to be used with a variety of paper types. Follow the guidelines in this section to ensure the best print quality and to avoid jams. For best results, use printing media specified for your Dell 7330 Mono Laser Printer. They are guaranteed to produce excellent results with your printer.

  • Page 62: Paper That May Damage Your Printer

    Paper that May Damage Your Printer Your printer is designed to be used with a variety of paper types. Other media types can cause poor print quality, increased paper jams, or damage to your printer. Note: If you use pre-printed material regularly, the feed rollers may require additional cleaning.

  • Page 63: Supported Paper Sizes And Weights

    Supported Paper Sizes and Weights The following sections provide information about paper sizes and weights that can be used in the printer trays. For more detailed information about paper and other media, print the Paper Tips page: On the control panel, select...
  • Page 64 Letter B5 JIS Auto-sensed when Metric Defaults is set to Off Auto-sensed Auto-sensed when Metric Defaults is set to On Dell 7330 Mono Laser Printer Supported Paper and Media Trays 2-5 60 – 215 g/m (16 – 57 lb. Bond) 5.5 x 8.5 in.
  • Page 65 Paper Sizes and Weights for Envelope Tray Large US Postcard #10 Commercial Monarch Non-standard envelope size Dell 7330 Mono Laser Printer Supported Paper and Media Envelope Tray 60 – 90 g/m (16 – 24 lb. Bond) 4.0 x 6.0 in.

  • Page 66: Tray Setup

    Set the paper size and type if prompted by the control panel. Tray 1 (MPT) 7330-100 Tray 1 (MPT) Long-Edge Feed (Recommended) Trays 2-5 7330-102 Trays 2-5 Long-Edge Feed (Recommended) Dell 7330 Mono Laser Printer Supported Paper and Media Tray 1 (MPT) Short-Edge Feed Trays 2-5 Short-Edge Feed 7330-101 7330-101 7330-106...
  • Page 67 Supported Paper and Media Tray 6 and Envelope Tray 7330-103 7330-204 Tray 6 Long-Edge Feed Envelope Tray Dell 7330 Mono Laser Printer...

  • Page 68: Loading Paper

    If prompted by the control panel, confirm the paper type and size and change it as required. Send the job to the printer from the application’s Print dialog box. Loading Paper in Tray 1 (MPT) for Single-Sided Printing All paper sizes and types can be used in Tray 1 (MPT).
  • Page 69 Lower Tray 1 (MPT). Adjust the paper guides to the size of the paper. Dell 7330 Mono Laser Printer 7330-262 7330-125 4-10 Loading Paper...
  • Page 70 Recommended for Letter, A4, B5 JIS, large US Postcard, envelopes, and many custom sizes of paper. ■ Do not load paper above the fill line. ■ Place the side to be printed facedown. Dell 7330 Mono Laser Printer 7330-251 7330-100 4-11 Loading Paper...
  • Page 71 Place pre-punched paper with the holes entering the printer last. ■ ■ Place the letterhead (or top of the page) toward the front of the printer. Short-Edge Feed ■ Place Letter, Legal, Statement, Tabloid, A3, A4, A5, US Folio, B4 JIS, B5 JIS, B6 JIS, and small US Postcard paper short-edge feed in Tray 1 (MPT).

  • Page 72: Loading Paper In Trays 2-5 For Single-Sided Printing

    Select the paper type, and then press the OK button. Select the paper size, and then press the OK button to save your selection. In the printer driver, select either the paper type or Tray 1 (MPT) as the paper source. Loading Paper in Trays 2-5 for Single-Sided Printing Trays 2-5 can be used for all paper, transparencies, specialty media, and many sizes.
  • Page 73 Pull out the tray. Fan the paper to release sheets that may stick together. Dell 7330 Mono Laser Printer 7330-156 7330-251 4-14 Loading Paper...
  • Page 74 Place the side to be printed faceup. Place pre-punched paper with the holes toward the right side of the tray. ■ ■ Place letterhead (or the top of the page) toward the front of the tray. Dell 7330 Mono Laser Printer 7330-129 7330-130 4-15 Loading Paper...
  • Page 75 Adjust the paper guides according to the paper size and feed direction (long-edge feed or short-edge feed). Labels inside the paper tray provide additional information for loading paper according to size and feed direction. Dell 7330 Mono Laser Printer 7330-254 7330-132...

  • Page 76: Loading Paper In Tray 6 For Single-Sided Printing

    Select the paper size, and then press the OK button to save your selection. In the printer driver, select either the paper type or the tray you loaded as the paper source. Loading Paper in Tray 6 for Single-Sided Printing Use Tray 6 as a high capacity feeder for Letter, A4, Executive, and B5 JIS paper.
  • Page 77 Loading Paper If loading paper with a different width or length, adjust the width and length guides. 7330-241 8.5" 7330-240 Dell 7330 Mono Laser Printer 4-18...
  • Page 78 Place pre-punched paper with the holes toward the left side of the tray. ■ Place letterhead (or the top of the page) toward the front of the tray. Push the tray completely into the printer. Dell 7330 Mono Laser Printer Loading Paper 7330-251 7330-255...

  • Page 79: Loading Paper In Tray 1 (Mpt) For 2-Sided Printing

    Change setup Select the paper type, and then press the OK button to save your selection. In the printer driver, select either the paper type or Tray 6 as the paper source. Loading Paper in Tray 1 (MPT) for 2-Sided Printing All standard paper sizes, except postcard, B6 JIS, and envelopes, and most custom paper sizes can be used in Tray 1 (MPT) for 2-sided printing.
  • Page 80 Adjust the paper guides to the size of the paper. Fan the paper to release sheets that may stick together. Dell 7330 Mono Laser Printer 7330-125 7330-251 4-21 Loading Paper...
  • Page 81 Place the side to be printed first (page 1) faceup. ■ Place pre-punched paper with the holes entering the printer first. Place the letterhead (or top of the page) toward the front of the printer. ■ Dell 7330 Mono Laser Printer...
  • Page 82 Select the paper type, and then press the OK button. Select the paper size, and then press the OK button to save your selection. In the printer driver, select either the paper type or Tray 1 (MPT) as the paper source. Dell 7330 Mono Laser Printer...

  • Page 83: Loading Paper In Trays 2-5 For 2-Sided Printing

    If you fail to do this, print-quality problems can occur and the fuser can be damaged. Pull out the tray. Fan the paper to release sheets that may stick together. Dell 7330 Mono Laser Printer 7330-156 7330-251 4-24 Loading Paper...
  • Page 84 Place the side to be printed first (page 1) facedown. Place pre-punched paper with the holes toward the left side of the tray. ■ ■ Place letterhead (or the top of the page) toward the front of the tray. Dell 7330 Mono Laser Printer 7330-129 7330-134 4-25 Loading Paper...
  • Page 85 Adjust the paper guides according to the paper size and feed direction (long-edge feed or short-edge feed). Labels inside the paper tray provide additional information for loading paper according to size and feed direction. Dell 7330 Mono Laser Printer 7330-135 7330-132...

  • Page 86: Loading Paper In Tray 6 For 2-Sided Printing

    Select the paper size, and then press the OK button to save your selection. In the printer driver, select either the paper type or the tray you loaded as the paper source. Loading Paper in Tray 6 for 2-Sided Printing Use Tray 6 as a high capacity feeder for 2-sided printing of Letter, A4, Executive, and B5 JIS paper.
  • Page 87 Loading Paper If loading paper with a different width or length, adjust the width and length guides. 7330-241 8.5" 7330-240 Dell 7330 Mono Laser Printer 4-28...
  • Page 88 Place pre-punched paper with the holes toward the right side of the tray. ■ Place letterhead (or the top of the page) toward the front of the tray. Push the tray completely into the printer. Dell 7330 Mono Laser Printer Loading Paper 7330-251 7330-255...
  • Page 89 OK button. Change setup Select the paper type, and then press the OK button to save your selection. In the printer driver, select either the paper type or Tray 6 as the paper source. Dell 7330 Mono Laser Printer 4-30...

  • Page 90: Selecting Printing Options

    6-58 Selecting Printing Preferences (Windows) Printer preferences control all of your print jobs, unless you override them specifically for a job. For example, if you want to use automatic 2-sided printing for most jobs, set this option in printer settings.

  • Page 91: Selecting Options For An Individual Job (Windows)

    With the desired document or graphic open in your application, access the Print dialog box. Select the Dell 7330 printer and click its Properties button to open the printer driver. Make selections from the driver tabs. Note: For more information about Windows printer driver options, click the Help button on the printer driver to view the online help.

  • Page 92: Printing On Both Sides Of The Paper

    ■ Manual 2-sided printing is supported. Binding Preferences Use the printer driver to select Portrait or Landscape orientation for the images on the page. When you print 2-sided jobs, select the binding preference which determines how the pages turn. Portrait...

  • Page 93: Selecting 2-Sided Printing

    Selecting 2-Sided Printing To select automatic 2-sided printing: Insert paper into the tray. In the printer driver, select 2-sided printing as shown in the following table, and then press the OK button. To select automatic 2-sided printing: Operating System Steps Windows Vista, Select the Paper/Output tab.

  • Page 94: Printing On Specialty Media

    ■ Printing Transparencies from Trays 2-5 Transparencies can be printed from any tray. They should be printed on one side only. To order Dell supplies, contact your local reseller or go to www.dell.com/supplies. Guidelines for Transparencies ■ Remove all paper before loading transparencies in the tray.
  • Page 95 Transparency Select the paper size, and then press the OK button to save your selection. In the printer driver, select either Transparency as the paper type or the tray you loaded as the paper source. Printing Transparencies from Trays 2-5 Fan the transparencies to release sheets that may stick together.
  • Page 96 Transparency Select the paper size, and then press the OK button to save your selection. In the printer driver, select either Transparency as the paper type or the tray you loaded as the paper source. Dell 7330 Mono Laser Printer...

  • Page 97: Printing Envelopes

    When using commercial flap envelopes with side seams (vs. diagonal seams) verify that the side seams are cut all the way to the corner of the envelope. Caution: Never use envelopes with windows or metal clasps; they can damage the printer. Dell 7330 Mono Laser Printer Printing on Specialty Media...
  • Page 98 , and then press the OK button. Envelope Select the paper size, and then press the OK button to save your selection. In the printer driver, select Envelope as the paper type or Tray 1 (MPT) as the paper source. Dell 7330 Mono Laser Printer Printing on Specialty Media Long-Edge Feed –...
  • Page 99 Custom Size Paper on page 4-45. In the printer driver, select Envelope as the paper type or Tray 2 as the paper source. Dell 7330 Mono Laser Printer Printing on Specialty Media...

  • Page 100: Printing Postcards

    4-41 ■ Printing Postcards on page 4-41 To order Dell supplies, contact your local reseller or go to www.dell.com/supplies. Guidelines for Postcards Postcards can be printed from Tray 1 (MPT) or the optional Envelope Tray. ■ Store unused postcards flat in their original packaging. Leave them inside the original packaging until ready to use.
  • Page 101 Card Stock Select the paper size, and then press the OK button to save your selection. In the printer driver, select Card Stock as the paper type, or Tray 1 (MPT) or Tray 2 as the paper source. Dell 7330 Mono Laser Printer...

  • Page 102: Printing Labels

    4-43 ■ Printing Labels on page 4-43 To order Dell supplies, contact your local reseller or go to www.dell.com/supplies. Guidelines for Labels ■ Do not use vinyl labels. Do not use any labels on a sheet where items are missing; it may damage printer ■...
  • Page 103 Labels Select the paper size, and then press the OK button to save your selection. In the printer driver, select either Labels or the tray you loaded as the paper source. Dell 7330 Mono Laser Printer Printing on Specialty Media...

  • Page 104: Printing On Custom Size Paper

    Long Edge 98 – 432 mm (3.87 – 17.0 in.) For more information on paper types, weights, and sizes, see page 4-2. Dell 7330 Mono Laser Printer Printing on Custom Size Paper Input Tray Trays 2–5 Envelope Tray 140 – 297 mm 98 –...

  • Page 105: Printing Custom Size Paper

    Loading the Paper Trays Insert custom size paper in Tray 1 (MPT) or Trays 2-5. Tray 1 (MPT) Long-Edge Feed Trays 2-5 Long-Edge Feed Dell 7330 Mono Laser Printer Printing on Custom Size Paper 7330-151 Short-Edge Feed 7330-149 Short-Edge Feed...
  • Page 106 Adjust the paper guides to the size of the paper. Labels inside the paper tray provide additional information for loading paper according to size and orientation. Tray 1 (MPT) Push the tray completely into the printer. Dell 7330 Mono Laser Printer Printing on Custom Size Paper 7330-125 Trays 2-5...
  • Page 107 If you later replace the custom size in a tray with a standard size, be sure to set the new size in the control panel (or Auto Select for a size that is auto sensed). Dell 7330 Mono Laser Printer Printing on Custom Size Paper...

  • Page 108: Creating Custom Paper Types

    Creating Custom Paper Types Custom paper types are created in the Embedded Web Server and appear in the printer driver, control panel, and EWS. Use this feature to create your own custom paper type with specific settings that you can reuse for routine print jobs, for example, monthly reports.

  • Page 109: Using The Stapler

    Using the Stapler Stapling Options Several stapling options are available in the Dell 7330 Mono Laser Printer driver: ■ No Stapling: This is the default option. When selected, prints are not stapled. ■ 1 Staple: Inserts one staple in each set of copies.

  • Page 110: Adding Staples

    Adding Staples Open Door G. Note: See the instructions on the inside of Door G. Slide the stapler toward you, and then to the right. Dell 7330 Mono Laser Printer Using the Stapler 7330-186 7330-243 4-51...
  • Page 111 Remove the staple unit by lifting it up and out. If present, remove the depleted staple cartridge. Inset a new staple cartridge. Insert the staple unit in the finisher. Dell 7330 Mono Laser Printer Using the Stapler 7330-244 7330-245 4-52...
  • Page 112 Using the Stapler Close Door G. 7330-018 Dell 7330 Mono Laser Printer 4-53...

  • Page 113: Using The Hole Puncher

    Using the Hole Puncher Depending on your region, the optional finisher is factory configured with either a 3-hole punch or a 2- / 4-hole punch unit. To determine which option is installed on your printer, print a Configuration Page from the control panel.

  • Page 114: Emptying The Punch Waste Box

    Emptying the Punch Waste Box Open Door G. Remove the Punch Waste Box and empty the contents. Place the Punch Waste Box back into the finisher. Close Door G. Dell 7330 Mono Laser Printer Using the Hole Puncher 7330-097 7330-099 4-55...

  • Page 115: Advanced Options

    Select the separator option and tray to use from the Separators dialog box. Mac OS X (version 10.3 In the Print dialog box, select Printer Features from the drop-down and higher) list. Under Paper Feed Options, select Last Page Paper Source drop-down list, and then select the tray to use for the separator.

  • Page 116: Advanced Options

    Click the button for the number of pages you want to appear on each side of the sheet. Mac OS X (version 10.3 In the Print dialog box, select Layout. and higher) Select the number of Pages per Sheet and Layout Direction. Dell 7330 Mono Laser Printer 4-57 Advanced Options...

  • Page 117: Printing Booklets

    Draw Page Borders: Prints a border around each page. ■ Target Paper Size: Specifies the size of the paper for the booklet. Right to Left: Reverses the order of the pages in the booklet. ■ Dell 7330 Mono Laser Printer Advanced Options Gutter 4-58...

  • Page 118: Printing Negative And Mirror Images

    PostScript driver. To select negative or mirror images in a supported driver: Operating System Steps Windows 2000 or later Select the Advanced tab. PostScript Driver Select Yes for Mirrored Output or Negative Output. Dell 7330 Mono Laser Printer Advanced Options 4-59...

  • Page 119: Scaling

    If you select Manually Scale, enter a percentage in the percentage box. Mac OS X (version 10.3 Select File. and higher) Select Page Setup. Specify the percentage in the box for Scale. Dell 7330 Mono Laser Printer Advanced Options 4-60...

  • Page 120: Printing Edge-To-Edge

    Set Edge-To-Edge Printing to On. Mac OS X (version 10.3 Submit your print job from your application. On the Printer and higher) drop-down list, select the 7330 printer. On the pane selection drop-down list, select Paper Feed Options. Set Edge-To-Edge Printing to On. Note: When Edge-To-Edge Printing is set to On, documents print to the edge of the page.

  • Page 121: Printing Watermarks

    ■ In the Watermarks drop-down list for Options: ■ ■ Dell 7330 Mono Laser Printer To use an existing watermark, select it from the Watermarks drop-down list. To modify the watermark, click the Edit button to display the Watermark Editor dialog box.

  • Page 122: Printing Cover Pages

    Printing Cover Pages A cover page is the first or last page of a document. The printer enables you to choose a different paper source for the cover page than for the body of a document. For instance, use your company letterhead for the first page of a document, or use card stock for the first and last pages of a report.

  • Page 123: Job Completion Notification

    You can select to be notified when your job is done printing. A message appears in the lower- right corner of your computer screen with the name of the job and the name of the printer where it was printed.

  • Page 124: Printing Or Deleting Secure, Personal, Proof, And Saved Print Jobs

    ■ Printing or Deleting Personal Saved Jobs You can select one of the following special job types if your printer has a hard drive: ■ Personal Print: Prints the job when you select your user name on the control panel or in the Embedded Web Server.
  • Page 125 0000 through 9999, in the Numeric Password field. For a proof print or saved print job, enter a document name (up to 20 ■ alpha characters) in the Document Name field. Dell 7330 Mono Laser Printer Advanced Options 4-66...
  • Page 126 To change the order of the jobs to be printed, select a job to be moved in the list on the right, and then click the Move Up or Move Down button. Note: Print With jobs are not available for AppleTalk or USB connected printers. Dell 7330 Mono Laser Printer Advanced Options 4-67...
  • Page 127 OK button. If you are printing, scroll to the desired number of copies, and then press the OK button to print the job. Dell 7330 Mono Laser Printer on the control panel. Use the Back button to 0222 , and then press the OK button to print or delete the job.
  • Page 128 Select the desired job, and then press the OK button. Select Print and Save Delete Dell 7330 Mono Laser Printer on the control panel. Use the Back button to 0222 , and then press the OK button to print or delete the job.

  • Page 129: Managing Your Printer

    Managing Your Printer This chapter includes: ■ Printer Settings on page 5-2 ■ Printer Security on page 5-9 Analyzing Printer Usage on page 5-12 ■ See also: Printer Management Software Dell 7330 Mono Laser Printer on page 3-10...

  • Page 130: Printer Settings

    OK button on the control panel. If you find that the printer is going into Power Saver mode too often and you do not want to wait while the printer warms up, increase the length of time before the printer goes into Power Saver mode.

  • Page 131: Selecting Output Options

    Selecting Output Options The Dell 7330 Mono Laser Printer has one standard output tray and two optional ones: ■ Standard Output Tray: Sends prints to the Standard Output Tray on top of the printer. ■ Stacker Upper Tray: Sends prints to the Stacker Upper Tray on the right side of the printer.

  • Page 132: Accessing The Startup Page

    Accessing the Startup Page The printer can produce a Startup Page each time the printer is turned on or reset. The factory default is Off. You can turn on automatic printing of the Startup Page or print it from the menu.

  • Page 133: Accessing Load Paper Timeout

    Accessing Load Paper Timeout When your print job is formatted for a type or size of paper that is not loaded in the printer, the printer’s control panel displays a message requesting you to load the appropriate paper. The Load Paper Timeout controls the amount of time the printer waits before printing on another type or size of paper.

  • Page 134: Selecting Tray Settings

    Tray 1 (MPT), Tray 2, and Tray 3 are standard features of the Dell 7330 Mono Laser Printer. Additional paper feeders can be purchased: ■...
  • Page 135 Press the OK button to save the change. Note: The driver overrides the control panel settings and EWS for tray selection. Dell 7330 Mono Laser Printer , and then press the OK button. , and then press the OK button.

  • Page 136: Changing Printer Language

    , and then press the OK button. Control Panel Setup Select , and then press the OK button. Language Select the desired language, and then press the OK button. Dell 7330 Mono Laser Printer Printer Settings , and then press the OK button.

  • Page 137: Printer Security

    Administrative settings in the Embedded Web Server enable you to select settings based on three levels of user security: ■ Any user: Includes the majority of people who will be sending print jobs to the printer. ■ Key user: A person who has some administrative responsibilities and who manages some or all of the printer functions.

  • Page 138: Selecting Printing Security Settings

    Install certificates ■ Create certificates or certificate signing requests (CSR) ■ Delete certificates For more information, click the Help button in the Embedded Web Server to go to the EWS Online Help. Dell 7330 Mono Laser Printer Printer Security 5-10...

  • Page 139: Configuring 802.1X

    For more information, click the Help button in the Embedded Web Server to go to the EWS Online Help. Locking the Control Panel Menus Lock the control panel menus to prevent others from changing settings in the printer setup menus. To lock or unlock the printer’s control panel menus: Launch your web browser.

  • Page 140: Analyzing Printer Usage

    Job accounting is available through the Embedded Web Server. The printer stores information about print jobs in a log file. The log file is stored either in the printer’s RAM memory or on the hard drive if one is installed in the printer.

  • Page 141: Usage Profile Reports

    Usage Profile Reports The printer generates reports accessible through the Embedded Web Server that detail device usage. Usage profile reports track multiple items, including: ■ Printer information, such as printer name, date installed, total pages printed, options installed, and network ID.

  • Page 142: Mailinx Alerts

    MaiLinX Alerts MaiLinX alerts enable the printer to automatically send email to the system administrator and others under the following conditions: ■ When printer errors, warnings, and alerts occur. ■ When the printer requires attention (for example, when service is required or supplies need to be replenished).

  • Page 143: Troubleshooting

    This section includes: ■ Automatic Diagnostic Tools on page 6-2 ■ Clearing Paper Jams on page 6-3 Print-Quality Problems on page 6-58 ■ ■ Control Panel Messages on page 6-69 ■ Additional Resources on page 6-71 Dell 7330 Mono Laser Printer...

  • Page 144: Automatic Diagnostic Tools

    Status Monitor is a tool that is installed with your Windows printer driver. It automatically checks the printer status when you send a print job. If the printer is unable to print your job, Status Monitor automatically displays a message on your computer screen to let you know that the printer needs attention.

  • Page 145: Clearing Paper Jams

    6-45 ■ ■ Jam at Tray 4 or 5 and Door C ■ Jam at Tray 6 on page 6-55 Dell 7330 Mono Laser Printer on page 6-26 on page 6-27 on page 6-50 7330-070 Clearing Paper Jams 7330-208...

  • Page 146: Jam At A

    Use caution; some components inside Door A may be hot. Open Door A. Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed.
  • Page 147 Clearing Paper Jams Close Door A. 7330-003 Dell 7330 Mono Laser Printer...

  • Page 148: Jam At B

    Jam at B Follow these steps to clear the jam. If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder away from the printer. Open Door B. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-230 7330-004...
  • Page 149 Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Close Door B. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-005 7330-006...

  • Page 150: Jam At B And C

    If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder firmly against the printer. Jam at B and C Follow these steps to clear the jam. If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder away from the printer.
  • Page 151 Open Door B. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-004 7330-005...
  • Page 152 Close Door B. Open Door C. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-006 7330-007 6-10...
  • Page 153 Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Close Door C. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-008 7330-009 6-11...

  • Page 154: Jam At C

    If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder firmly against the printer. Jam at C Follow these steps to clear the jam. If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder away from the printer.
  • Page 155 Open Door C. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-007 7330-008 6-13...
  • Page 156 Close Door C. If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder firmly against the printer. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-009 7330-231 6-14...

  • Page 157: Jam At D

    Jam at D Follow these steps to clear the jam. Open Door D. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-027 7330-028 6-15...

  • Page 158: Jam At D And A

    Close Door D. Jam at D and A Follow these steps to clear the jam. Open Door D. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-029 7330-027 6-16...
  • Page 159 Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Close Door D. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-028 7330-029 6-17...
  • Page 160 Use caution; some components inside Door A may be hot. Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed.

  • Page 161: Jam At E

    Close Door A. Jam at E Follow these steps to clear the jam. Warning: Use caution; some components inside Door A may be hot. Open Door A. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-003 7330-001 6-19...
  • Page 162 Open Door E. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-010 7330-011 6-20...
  • Page 163 Close Door E. Close Door A. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-012 7330-003 6-21...

  • Page 164: Jam At F

    Jam at F Follow these steps to clear the jam. Open Door F. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Dell 7330 Mono Laser Printer 7330-013 7330-014 6-22 Clearing Paper Jams 7330-273...

  • Page 165: Jam At G

    Close Door F. Jam at G Follow these steps to clear the jam. On the control panel of the printer, press the i button to view information about the control panel message. If visible, pull the jammed paper out of the stacker upper tray.
  • Page 166 If the stapler is in the way, slide the stapler toward you then to the right. If you opened handle 2a or handle 2b, rotate knob 2c counterclockwise as needed. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Close the handles opened in Step 3.

  • Page 167: Jam At H

    Jam at H Follow these steps to clear the jam. Lift Door H. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-270 7330-202 6-25...

  • Page 168: Jam At The Stacker Upper Tray

    Close Door H. Jam at the Stacker Upper Tray Follow these steps to clear the jam. Pull the jammed paper out of the stacker upper tray. Open Door G. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-271 7330-025 6-26...

  • Page 169: Paper Size Jam In Tray 1 (Mpt)

    Verify that the width guides are pressed against the paper. If the paper size and type shown on the control panel match the size and type of the paper in the tray, press the OK button. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-018...
  • Page 170 Open Door A. Warning: Use caution; some components inside Door A may by hot. Dell 7330 Mono Laser Printer , and then press the OK button. , or a listed paper size, and then press the OK button. , press the OK button, scroll to the height of the...
  • Page 171 Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confrim that all paper fragments are removed. Close Door A. Dell 7330 Mono Laser Printer Clearing Paper Jams...

  • Page 172: Paper Size Jam In Trays 2-5

    Follow these steps to clear the paper size jam in Trays 2-5. Pull out the tray specified on the control panel. Verify that the length and width guides are pressed against the paper. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-230...
  • Page 173 OK button. Open Door A. Warning: Use caution; some components inside Door A may be hot. Dell 7330 Mono Laser Printer 7330-032 , and then press the OK button. Printer Setup , and then press the OK button.
  • Page 174 Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed. Close Door A. Dell 7330 Mono Laser Printer Clearing Paper Jams...

  • Page 175: Paper Size Jam In Tray 6

    Verify that the length and width guides are set correctly. Note: The default setting is for 8.5 x 11 in. paper. You must change the guides for A4 paper. 8.5" Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-239 7330-240 6-33...
  • Page 176 OK button. Auto Sensed Open Door A. Warning: Use caution; some components inside Door A may be hot. Dell 7330 Mono Laser Printer 7330-115 , and then press the OK button. Printer Setup , and then press the OK button.
  • Page 177 Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed. Close Door A. Dell 7330 Mono Laser Printer Clearing Paper Jams...

  • Page 178: Jam At Tray 2, 3, 4, Or 5

    Follow these steps to clear the jam. Pull the tray specified on the control panel completely out of the printer. Pull jammed paper from the printer tray slot. Confirm that all paper fragments are removed. Dell 7330 Mono Laser Printer...
  • Page 179 Remove crumpled paper from the tray. Verify that the paper is loaded correctly in the tray and that the guides are pressed against the paper. Dell 7330 Mono Laser Printer 7330-031 7330-063 6-37 Clearing Paper Jams 7330-064...

  • Page 180: Jam At Tray 1 (Mpt)

    Insert the tray and push it completely into the printer. Jam at Tray 1 (MPT) Follow these steps to clear the jam. Open Door A. Dell 7330 Mono Laser Printer 7330-216 7330-001 6-38 Clearing Paper Jams...
  • Page 181 Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed. Remove jammed or crumpled paper from Tray 1 (MPT), and then close the tray.
  • Page 182 Close Door A. Verify that the paper is loaded correctly in the tray and that the guides are pressed against the paper. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-003 7330-220 6-40...

  • Page 183: Jam At Tray 2 And Door A

    Use caution; some components inside Door A may be hot. Open Door A. Pull the jammed paper out of the printer. If necessary, press the green handle to move the paper to make it easier to remove. Confirm that all paper fragments are removed.
  • Page 184 Close Door A. Pull Tray 2 completely out of the printer. Dell 7330 Mono Laser Printer 7330-003 7330-210 6-42 Clearing Paper Jams...
  • Page 185 Pull jammed paper from the printer tray slot. Confirm that all paper fragments are removed. Remove crumpled paper from the tray. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-214 7330-031 6-43...
  • Page 186 Verify that the paper is loaded correctly in the tray and that the length and width guides are pressed against the paper. Insert the tray and push it completely into the printer. Dell 7330 Mono Laser Printer 7330-063 7330-216 6-44...

  • Page 187: Jam At Tray 3 And Door B

    Jam at Tray 3 and Door B Follow these steps to clear the jam. If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder away from the printer. Open Door B. Dell 7330 Mono Laser Printer Clearing Paper Jams...
  • Page 188 Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Close Door B. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-005 7330-006 6-46...
  • Page 189 If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder firmly against the printer. Pull Tray 3 completely out of the printer. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-231 7330-211 6-47...
  • Page 190 Pull jammed paper from the printer tray slot. Confirm that all paper fragments are removed. Remove crumpled paper from the tray. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-215 7330-250 6-48...
  • Page 191 Verify that the paper is loaded correctly in the tray and that the length and width guides are pressed against the paper. Insert the tray and push it completely into the printer. Dell 7330 Mono Laser Printer 7330-063 7330-217 6-49...

  • Page 192: Jam At Tray 4 Or 5 And Door C

    Jam at Tray 4 or 5 and Door C Follow these steps to clear the jam. If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder away from the printer. Open Door C. Dell 7330 Mono Laser Printer...
  • Page 193 Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Close Door C. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-008 7330-009 6-51...
  • Page 194 If the printer has the 2000-Sheet Feeder (Tray 6), slide the feeder firmly against the printer. Pull the tray specified on the control panel completely out of the printer. Dell 7330 Mono Laser Printer 7330-231 7330-212 6-52 Clearing Paper Jams...
  • Page 195 Pull jammed paper from the printer tray slot. Confirm that all paper fragments are removed. Remove crumpled paper from the tray. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-051 7330-250 6-53...
  • Page 196 Verify that the paper is loaded correctly in the tray and that the length and width guides are pressed against the paper. Insert the tray and push it completely into the printer. Dell 7330 Mono Laser Printer 7330-063 7330-216 6-54...

  • Page 197: Jam At Tray 6

    Follow these steps to clear the jam. If Tray 1 is open, remove the paper from the tray and close it. Slide the Tray 6 Feeder away from the printer. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-221 7330-230...
  • Page 198 Open Door J and lift the access handle. Pull the jammed paper out of the printer. Confirm that all paper fragments are removed. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-232 7330-235 6-56 7330-234...
  • Page 199 Close the jam access handle and close Door J. Slide the Tray 6 Feeder firmly against the printer. Dell 7330 Mono Laser Printer Clearing Paper Jams 7330-236 7330-231 6-57 7330-237...

  • Page 200: Print-Quality Problems

    Supported Paper and Media Caution: Damage caused by using unsupported paper, transparencies, and other specialty media is not covered by the Dell warranty or service agreement. Light Prints The overall image is lighter than normal. Possible Causes The paper may be damp.

  • Page 201: Blank Prints

    Multiple sheets may have been fed from the paper tray at the same time. Printable data may not have been received from the computer. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Remove the tape. Remove the paper from the paper tray and fan it.

  • Page 202: Black Prints

    The entire printed page is black. Possible Causes The drum cartridge may be defective. Printable data from the computer may be corrupted. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Replace the drum cartridge. Print a Configuration page. If the Configuration page prints correctly, ■...

  • Page 203: Horizontal Line Deletions

    The drum cartridge may not be installed correctly. The drum cartridge may be defective or at the end of its life. The transfer roller may be defective. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Remove and re-install the drum cartridge.

  • Page 204: Vertical Line Deletions

    The paper may be defective with creases, folds, etc. The drum cartridge may be defective or at the end of its life. The transfer roller may be defective. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Replace the paper. Replace the drum cartridge.

  • Page 205: Horizontal Dark Streaks

    The paper path may be contaminated with toner. The drum cartridge may be defective or at the end of its life. The fuser may be defective. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Replace the drum cartridge. Print several blank sheets of paper to remove the toner accumulations.

  • Page 206: Dark Spots Or Marks

    The paper path may be contaminated with toner. The drum cartridge may be defective. The fuser may be defective. The transfer roller may be defective. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Print several blank sheets of paper to remove the toner accumulations.

  • Page 207: Unfused Or Partially Fused Image

    Heavy or unusual paper may be in the tray. The printer may be located in an environment with extreme temperature or humidity. The fuser may be defective. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Replace the paper. Replace the paper with an approved paper type...

  • Page 208: Wrinkled Prints

    The image is blurred at the edges. Possible Causes The paper may be in poor condition. The paper may be damp. The drum cartridge may be defective. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Verify that the paper is correctly loaded in the appropriate tray.

  • Page 209: Random Or Spot Deletions

    Possible Causes The paper may be in poor condition. The paper may be damp. The drum cartridge may be defective or at the end of its life. Dell 7330 Mono Laser Printer Print-Quality Problems Solutions Replace the paper. Replace the paper.

  • Page 210: Repeating Defects

    Reinstall the original drum cartridge. Replace the maintenance kit (fuser and transfer roller). If the problem continues, contact your Customer Support Center. To order Dell supplies, contact your local reseller or go to www.dell.com/supplies. Dell 7330 Mono Laser Printer Print-Quality Problems...

  • Page 211: Control Panel Messages

    Status Message Ready to Print Processing data - Please wait Receiving data - Please wait Printing page x of y Warming up - Please wait Dell 7330 Mono Laser Printer Control Panel Messages Control panel display Help button 7330-120 Description The printer is ready to receive print jobs.

  • Page 212: Errors And Warnings

    The control panel ? button also provides valuable information about errors and warnings. Hardware or software failures that may require service support are presented as fatal errors. When the printer’s control panel displays a fatal error message, the LED blinks red. A fatal error message replaces the status lines.

  • Page 213: Additional Resources

    Additional Resources Dell provides many resources to help you learn more about your Dell 7330 Mono Laser Printer. Use these web sites to obtain information about your printer: Resource Status Monitor Technical Support automatically diagnoses problems on your networked printer and...

  • Page 214: Maintenance

    Maintenance This chapter includes: ■ Cleaning the Printer on page 7-2 ■ Supplies on page 7-3 ■ Moving and Repacking the Printer Dell 7330 Mono Laser Printer on page 7-4...

  • Page 215: Cleaning The Printer

    Never touch a labeled area found on or near the heat roller in the fuser. You can get burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it by yourself to avoid injuries or burns. Switch off the printer immediately. Go to the Dell Support website, www.support.dell.com.

  • Page 216: Supplies

    Dell supplies not specified for this printer. Consumables Consumables for the Dell 7330 Mono Laser Printer are a toner cartridge and a staple pack. Routine Maintenance Items Routine maintenance items are printer parts or assemblies that have a limited life requiring periodic replacement.

  • Page 217: Moving And Repacking The Printer

    Dell service representative. Caution: Failure to repackage the printer properly for shipment can result in damage to the printer. Damage to the printer caused by improper moving is not covered by the Dell warranty or service agreement. Dell 7330 Mono Laser Printer...

  • Page 218: Printer Specifications

    Height: 280 mm (11 in.) ■ ■ Weight: 23 kg (50.7 lb.) Optional 2000-Sheet Feeder ■ Width: 385.5 mm (15.2 in.) ■ Depth: 600 mm (23.6 in.) ■ Height: 363 mm (14.3 in.) ■ Weight: 28 kg (62 lb.) Dell 7330 Mono Laser Printer...
  • Page 219 ENERGY STAR qualified printer Default time to Power Saver: 60 minutes Performance Specifications Resolution 600 x 600 dpi ■ ■ True 1200 x 1200 dpi Print Speed ■ Up to 50 pages per minute (ppm) Dell 7330 Mono Laser Printer...
  • Page 220 ■ Upgradable to a maximum of 2 GB Page Description Languages (PDL) ■ ■ PCLXL ■ Adobe PostScript 3 ■ Fonts PostScript ■ ■ Interfaces ■ IEEE 1284 parallel ■ Ethernet 10BaseT and 100BaseTx ■ Dell 7330 Mono Laser Printer...
  • Page 221 IP address dynamically, 3-6 automatic 2-sided printing, 4-33 automatically setting the printer’s IP address (Windows only), 3-5 available printer drivers, 3-11 Dell 7330 Mono Laser Printer basic printing, 4-9 binding preferences, 4-33 booklets printing, 4-58 BOOTP/DHCP, 3-7...
  • Page 222 IP address, 3-8 setting the printer’s IP address dynamically, 3-6 diagnostic tools, 6-2 divider page, 4-56 Dell 7330 Mono Laser Printer local domain name space database, 3-7 resolver protocol, 3-7 servers, 3-7 driver other methods installation...
  • Page 223 2-11 printing a list from the Embedded Web Server, 2-11 printing font samples, 2-11 supplement resident fonts, 2-10 Dell 7330 Mono Laser Printer getting help technical support, 2-12 ground connection terminal, 1-2 guidelines envelopes, 4-38...
  • Page 224 4-43 loading in Tray 1 (MPT), 4-43 loading in Tray 6, 4-44 loading in Trays 2-5, 4-44 printing, 4-43 Dell 7330 Mono Laser Printer lifting the printer, 1-8, 7-4 load paper timeout, 5-5 loading custom size paper, 4-46 Envelope Tray, 4-40...
  • Page 225 4-56 separation pages, 4-56 storage guidelines, 4-3 supported sizes and weights, 4-4 type, 4-20 unacceptable types, 4-3 Dell 7330 Mono Laser Printer paper jam at A, 6-3 at B, 6-6 at B and C, 6-8 at C, 6-12 at D, 6-15...
  • Page 226 2-4, A-3 help, 4-32 information resources, 2-12 job accounting, 5-12 MailinX alerts, 5-14 management software, 3-10 Dell 7330 Mono Laser Printer maximum print speed, 2-4 maximum resolution (dpi), 2-4 memory, 4-31 moving, 1-8, 7-4 obtaining the network path Windows 2000 or later, 3-15...
  • Page 227 (Windows), 4-31 separation pages, 4-56 several pages on a single sheet of paper, 4-57 test pages Windows 2000 or later, 3-14, 3-18 Dell 7330 Mono Laser Printer usage profile reports, 5-13 watermarks, 4-62 printing options changing, 4-31 proof print jobs...
  • Page 228 3-10 software failures, 6-70 specialty media custom size paper, 4-49 specifications physical, A-1 Dell 7330 Mono Laser Printer stapler behavior when low, 4-50 options, 4-50 Startup Page accessing, 5-4 status messages, 6-69, 7-3 Status Monitor alerts, 6-2...
  • Page 229 Windows 2000 or later, 3-17 Warmup Mode, 5-2 warning messages, 6-70 warning symbols, 1-7 watermarks, 4-62 Dell 7330 Mono Laser Printer web links information, 2-12 Windows install printer drivers for Windows 2000 or later, 3-12 printing options, 4-32...

This manual is also suitable for:

7330dnEvolution septic assist

Table of Contents