1
1
metal securing tabs (2)
3
mylar sleeve
Replacing a WLAN Card
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE:
To avoid damage to the WLAN card, never place cables under the card.
1 Insert the
WLAN
board connector labeled "WLAN."
2 Press the other end of the
the card clicks into place.
card connector at a 45-degree angle into the system
card down into the securing tabs until
WLAN
2
WLAN card
Adding and Replacing Parts
2
3
173