Installing The Cooktop Unit; Insert Cooktop Into Cutout; Locate Mounting Parts - GE CGP650SETSS Installation Instructions Manual

INSTALLING THE COOKTOP UNIT

1 LOCATE ELECTRICAL OUTLET AND
GAS SHUT-OFF VALVE BENEATH
CABINET
NEVER REUSE OLD
CONNECTORS WHEN
INSTALLING THIS
UNIT.
Install a manual shut-off valve in the gas line in an
easily accessible location outside the cooktop. Be
sure you know how and where to shut off the gas
supply to the cooktop. Install the electrical outlet
12" below the countertop.
2 PROTECT SURFACE OF COOKTOP
Place a towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
Bottom of cooktop
Cloth under Cooktop

3 LOCATE MOUNTING PARTS

Remove the hold down brackets from the literature
package.
Installation Instructions
Shut Off
Electrical
Valve
Outlet 12"
Below
Countertop
4 ATTACH BRACKETS TO COOKTOP
Remove the screw from the side of the cooktop
and screw the hold-down bracket
to the side of the cooktop unit. Repeat for opposite
side of cooktop.
Bottom of
Cooktop
Cooktop
Surface

5 INSERT COOKTOP INTO CUTOUT

Insert the cooktop centered into the cutout opening.
Make sure the front edge of the countertop is
parallel to the cooktop. Make final check that all
required clearances are met.
Once the unit is in place, screw the
hold- down bracket into the cabinet sides
to secure the unit into place.
5
Pre-drilled
hole
Cooktop