Replacing The Imaging Drum - Dell 1710 Owner's Manual

Replacing the Imaging Drum

You can determine approximately how full the imaging drum is by printing the printer settings
configuration sheet. This helps you decide when you might need to order replacement supplies.
For more information on printing the printer settings configuration sheet, see "Printing the
Printer Settings Configuration Sheet" on page 12.
To ensure print quality and to avoid damage to the printer, the printer stops operating after the
iamging drum has reached a maximum of 40,000 pages. The printer automatically notifies you
before the imaging drum reaches this point. For more information, see "Understanding the
Operator Panel Lights" in your User's Guide.
When you first receive the Replace imaging drum light sequence you should immediately order
a new imaging drum. While the printer may continue to function properly after the imaging
drum has reached its official end-of-life (approximately 30,000 pages), print quality begins to
significantly decrease until the imaging drum stops operating at the maximum of 40,000 pages.
NOTICE: When replacing an imaging drum, do not leave the toner cartridge or the new imaging
drum exposed to direct light for an extended period of time. Extended light exposure can cause print
quality problems.
Maintaining Your Printer
59