To Remove/Refit Door; Moving Top Heating Element; Maintenance - Whirlpool AKZM 657 Manual

Hide thumbs Also See for AKZM 657:
Table of Contents

Advertisement

MAINTENANCE

WARNING
REMOVING THE DOOR
To remove the door:
1.
Open the door fully.
2.
Lift the catches and push them forwards as far as they will go (Fig. 1).
3.
Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (Fig. 2).
To refit the door:
1.
Insert the hinges in their seats.
2.
Open the door fully.
3.
Lower the two catches.
4.
Close the door.
Fig. 1
Fig. 2
MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)
1.
Remove the side accessory holder grilles (Fig. 3).
2.
Pull the heating element out a little (Fig. 4) and lower it (Fig. 5).
3.
To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest
on the lateral supports.
Fig. 3
-
Use safety gloves.
-
Ensure the oven is cold before carrying out the following operations.
-
Disconnect the oven from the power supply.
Fig. 4
Fig. 5
GB6

Advertisement

Table of Contents
loading

This manual is also suitable for:

657

Table of Contents