Advertisement
Advertisement
Table of Contents
Related Manuals for Asus XG27WCMS
Summary of Contents for Asus XG27WCMS
- Page 1 Monitor Service Manual Model: XG27WCMS Version no.: 0 Release date: 2024/5/8...
- Page 2 ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
-
Page 3: Table Of Contents
Table of Contents 1. Safety Precautions ......................4 2. Exploded View ........................5 3. Disassembly and Assembly Procedures................ 6 Disassembly SOP ...................... 6 Assembly SOP ......................10 4. Trouble Shooting ......................14... -
Page 4: Safety Precautions
1. Safety Precautions FOR PRODUCTS CONTAINING LASER: DANGER- Invisible laser radiation when open. AVOID DIRECT EXPOSURE TO BEAM. CAUTION- Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION- The use of optical instruments with this product will increase eye hazard. TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL... -
Page 5: Exploded View
2. Exploded View Item Description Q'ty PANEL MIDDLE FRAME BACK COVER ASSY Shielding CTRL BOARD HOLDER LENS BOARD MAIN BOARD POWER BOARD MYLAR KEY BOARD #SCRW MACH FLATM3*0.5P*4.5L ZN #SCRW PH INT/TOO M3*9 TP-S C-ZN #SCRW PT PH W/FL M3*8 B-ZN #SCRW TAP FPH M3*3.5 L NI #SCRW FPHM4*10L(7.7/1.6)B-ZNNY STAND ASSY... -
Page 6: Disassembly And Assembly Procedures
3. Disassembly and Assembly Procedures Disassembly SOP Preparation before disassemble 1. Clean the room for disassemble 2. Identify the area for monitor 3. Check the position that the monitors be placed and the quantity of the monitor; prepare the area for material flow; according to the actual condition plan the disassemble layout 4. - Page 7 5) Unlock the screws*2 and 1 tape to disassemble Key Board from the Rear Case. Screw: (SCRW TAP CAP M3*1.34P*8L B-ZN) 6) Disassemble Key Board from the Key Board cover. 7) Pull off the Key Board cable from the Key Board.
- Page 8 1) Tear off the tapes and pull off lamp wire from panel and Main Board/Power Board. 2) Remove the shielding from Panel. Screw Torque: 6 driver Kg-cm 3) Unlock 11 screws and disassemble Middle Frame from panel. Screw: (#SCRW MACH FLATM3*0.5P*4.5L ZN) Please check the Panel Back Photo as...
- Page 9 1) Disassemble Lens Board and FFC Cable from the Middle Frame. 1) Disassemble Mylar from Power Board. POWER BOARD MAIN BOARD Torque Screw screw: 2) Unlock 6 PCBA screws. driver 6.5±0.5 Screw: (#SCRW PH INT/TOO Kg/cm M3*9TP-S C-ZN) POWER BOARD MAIN BOARD 3) Disassemble tape*1 and Main Board/ Power...
-
Page 10: Assembly Sop
3.2 Assembly SOP Preparation before assemble 1. Clean the room for work 2. Identify the area for material 3. Prepare the implement, equipment and materials as bellow: 1) Working table 2) Screw-driver 3) Glove 4) Cleaning cloth 5) ESD protection After unplugging the power cord, the power Board still have power energe. - Page 11 1) Place monitor head on curve sponge jig to avoid panel damage. 2) Assemble Middle Frame to panel and lock 11 screws. Screw P/N: 8F.5A224.4R5 (#SCRW MACH FLATM3*0.5P*4.5L 3) Insert FFC Cable Curve to Lens Board and sponge jig assemble Lens Board to Middle Frame.
- Page 12 1) Paste the conductive tape/yellow tape on the LADS Cable. Torque Screw screw: driver 4.5±0.5Kg/cm 2) Lock the screws*2 Screw: (#SCRW TAP FPH M3*3.5L NI) Insert Key Board cable to Key Board. Assemble Key Board to Key Board Cover. Assemble Key Board to Rear Case and lock 2 Screw...
- Page 13 Insert Key Board cable to Main Board. Assemble Rear Torque for Case to monitor and lock 4 screws. Rear Case Screw: screw: (#SCRW FPHM4*10L (7.7/1.6) B-ZNNY) 7-9Kg/cm Assembly the stand to Rear Case.
-
Page 14: Trouble Shooting
4. Trouble Shooting...
Need help?
Do you have a question about the XG27WCMS and is the answer not in the manual?
Questions and answers