Save Operation; Econo Cool Operation - Mitsubishi Electric Ecocore Ap 42 Series Operating Instructions Manual

I

-SAVE Operation

A simplified set back function enables to recall the preferred (preset)
setting with a single push of the
and you can go back to the previous setting in an instance.
1
Press during cool mode, ECONO COOL, heat
mode or NIGHT MODE to select I-SAVE mode.
2
Set the temperature, fan speed, and airflow direction.
• The same setting is selected from the next time by simply pressing
.
• Two settings can be saved. (One for cool mode, ECONO COOL, one
for heat mode)
• Select the appropriate temperature, fan speed, and airflow direction
according to your room.
Press again to cancel I-SAVE operation.
• I-SAVE operation also is cancelled when the Operation select button is
pressed.
Note:
Example of use:
1. Low energy mode
Set the temperature 2°C to 3°C warmer in Cool and cooler in Heat mode.
This setting is suitable for unoccupied room, and while you are sleeping.
2. Saving frequently used settings
Save your preferred setting for cool mode, ECONO COOL, heat mode and
NIGHT MODE. This enables you to select your preferred setting with a single
push of the button.
button. Press the button again
E
CONO COOL Operation
Swing airflow (change of airflow) makes you feel cooler than station-
ary airflow.
The set temperature and the airflow direction are automatically changed
by the microprocessor. It is possible to perform cooling operation with
keeping comfort. As a result energy can be saved.
1
Press during Cool mode
NO COOL operation.
The unit performs swing operation vertically in various cycles according to the
temperature airflow.
Press again to cancel ECONO COOL operation.
• ECONO COOL operation is also cancelled when the VANE button is
pressed.
page 6 to start ECO-
En-8