Subscribe to Our Youtube Channel
Related Manuals for DieHard DHD2400iSCO
Summary of Contents for DieHard DHD2400iSCO
- Page 1 Model No. DHD2400iSCO 2400 WATT INVERTER GENERATOR OPERATOR’S MANUAL DO NOT RETURN TO STORE! STOP HAVE QUESTIONS OR NEED SERVICE? 866-591-8921...
-
Page 2: Safety Warnings And Notices
Table of Contents Introduction Safety Warnings and Notices Thank you for choosing DieHard! This manual provides instruction on how to operate and use your generator safely and correctly; be sure to read and understand this manual before using your generator. -
Page 3: Safety Instructions
Safety Instructions Before operating your generator, you must read and understand the Operator's Manual and familiarize yourself with the safe operation practices. - Page 4 Safety Instructions Parallel Kit Precautions Carbon Monoxide Safety...
-
Page 5: Names Of Components
Names of Components Before operating your generator, you must read and understand the Operator's Manual and familiarize yourself with the safe operation practices. Knob Multifunction Switch Left Access Panel Right Access Panel... -
Page 6: Control Panel
Control Panel NEUTRAL FLOATING CONTROL PANEL FEATURES ① Low Idle Switch: When turned to the ON position, the engine Ground Terminal: The ground terminal is used to externally ⑥ will sense the load needed and run at a slower RPM to save fuel. ground the inverter. -
Page 7: Control Functions
Control Functions Overload Oil Light (Red) Multi-Switch OIL LIGHT LIGHT STOP oil light illuminates, the generator has detected STOP oil light illuminates and the generator has no electrical Multi-Switch AC Oil Light (Green) OIL LIGHT LIGHT Oil Indicator (Yellow) OIL LIGHT LIGHT oil light illuminates when electrical output is stable. - Page 8 Control Functions Preparing Your Generator Fuel Fuel Tank Cap Reset If the inverter is overloaded, the reset breaker will trip. The engine will continue to run, but there will be no output from the inverter. Unplug the devices and reduce the load. Push in the reset breaker to reset it.
-
Page 9: Starting The Generator
Preparing Your Generator Turn the Multi-Switch to "START". Reassemble the right access panel and tighten the right access STOP panel fasteners. Pre-use Inspections Multi-Switch Fuel Starting The Generator After the generator starts, turn the Multi-Switch to "RUN". STOP Multi-Switch Shutting Down The Generator Turn the Multi-Switch to "STOP". -
Page 10: Using The Generator
Shutting Down The Generator After the generator has completely cooled down, turn ventilation knob of fuel tank cap to "OFF". STOP Multi-Switch Using The Generator Operating Range of the Generator Generator Grounding Ideal Atmospheric Conditions Standard Deration Connecting Loads to the Generator Range of Application... -
Page 11: Service And Maintenance
Service and Maintenance... - Page 12 Service and Maintenance Adjustment of the Carburetor Oil Change Spark Plug ① Unscrew the fasteners on the right access panel ② counterclockwise and remove the right access panel ① ② ③ Screw oil dipstick, replace oil access cover, and tighten the fasteners. Air Filter A5RTC...
-
Page 13: Storage And Transport
Service and Maintenance Fuel Filter Screen Air Filter ① 1). Remove the left service access panel bolts , multifunction ① ② switch bolts , remove the left service access panel Storage and Transport Generator Long Term Storage 1). Turn off the generator and allow it to cool completely. ①... -
Page 14: Troubleshooting
Troubleshooting Engine No-Start Insufficient Engine Oil Ignition System 1) Make sure the generator is off ( Refer to “Shutting Down the Generator” on page 8 to page 9). Low Compression Engine Runs, No Power Output... -
Page 15: Technical Parameters
Technical Parameters 148F/P-3 48.6×43 79.7 2.2/5000 0.63 Gallon (2.4L) Engine Oil Capacity 11 fluid Ounces (0.33L) Oil Type Noise dB (@ 7m)(1/4 load) Max. Power (kW) Overall Dimension (in) 17.3”x9.8”x15.9” 33lbs.(15kg) -
Page 16: Electrical Schematic
Electrical Schematic 60Hz, 120V Electrical Schematic Diagram...
Need help?
Do you have a question about the DHD2400iSCO and is the answer not in the manual?
Questions and answers