Subscribe to Our Youtube Channel
Related Manuals for Metra Electronics 99-7871
Summary of Contents for Metra Electronics 99-7871
- Page 1 User Manual of Product 1: Metra 99-7871 Single DIN/Double DIN Installation Kit for 2006-2009 Honda Civic Vehicles Charcoal Grey...
-
Page 2: Kit Features
INSTALLATION INSTRUCTIONS FOR PART 99-7871 APPLICATIONS See application list inside WIRING & ANTENNA CONNECTIONS (sold separately) Honda Civic 2006-2011 Wiring Harness: 99-7871 • 70-1722 - Honda 2006-up Antenna Adapter: KIT FEATURES • 40-HD10 - Honda 2005-up • ISO DIN radio provision with pocket • Double DIN radio provision • Painted to match factory dash: 99-7871= Gunmetal, 99-7871T= Taupe TOOLS REQUIRED • Phillips screwdriver • Panel removal tool... - Page 3 99-7871 Dash Disassembly 99-7871 Table of Contents Honda Civic 2006-2011 Dash Disassembly 1. Unclip and remove the panel below the steering wheel. (Figure A) – Honda Civic 2006-2011 .................. 2-3 2. Remove the (1) Phillips screw exposed on the lower left side of Kit Assembly the panel above the steering wheel – ISO DIN radio provision with pocket ..............4-5 and around the instrument cluster. (Figure B) – Double DIN radio provision ................5-6 3. Unclip and remove the panel around top of steering wheel and instrument cluster. (Figure C) Continued on next page...
- Page 4 Dash Disassembly 99-7871 Honda Civic 2006-2011 4. Remove panel inside pocket below radio and climate controls then remove (2) 8 MM screws facing up behind panel. (Figure D) 5. Unclip and remove radio/climate control assembly. (Figure E) 6. Remove (3) Phillips screws securing the A/C vent to the radio/climate control panel. (Figure F) 7. Remove the (4) Phillips screws securing the climate control to the radio/climate control panel. (Figure F) (Figure D) 8. Remove the (2) Phillips screws securing the hazard switch to the radio/climate control panel. (Figure F) 9. Remove the (2) Phillips screws securing the passenger air bag on/off light to the radio/climate control panel. (Figure F) 9 10 Note: Some models do not have an...
-
Page 5: Iso Din Radio Provision With Pocket
ISO DIN radio provision with pocket Note: Secure the A/C vent, climate control, hazard switch, and the passenger air bag on/off light into the 99-7871 radio housing panel using the factory hardware. (Figure A1) Position the (6) metal factory retaining clips and (5) plastic white clips onto the radio housing in the same location as the factory radio/climate control panel. - Page 6 Kit Assembly 99-7871 ISO DIN radio provision with pocket 1. Mount the pocket to the radio brackets with the (4) #8 x 3/8” Phillips screws supplied. (Figure B) 2. Mount the bracket/pocket assembly to the radio housing trim panel with the included #8 screws. (Figure C) 3. Slide the radio into the radio brackets and secure with screws (Figure B) supplied with the radio. (Figure D) 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly. (Figure C) (Figure D)
-
Page 7: Double Din Radio Provision
Double DIN radio provision Note: Secure the A/C vent, climate control, hazard switch, and the passenger air bag on/off light into the 99-7871 radio housing panel using the factory hardware. (Figure A1) Position the (6) metal factory retaining clips and (5) plastic white clips onto the radio housing in the same location as the factory radio/climate control panel. - Page 8 Kit Assembly 99-7871 Double DIN radio provision 1. Attach the brackets to the radio housing trim panel trim plate with the supplied #8 x 3/8” screws. (Figure B) 2. From the back, slide the double DIN radio into the bracket/radio housing assembly and secure using the screws supplied with the radio. (Figure C) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 4. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly. (Figure B) (Figure C)
- Page 9 INSTALLATION INSTRUCTIONS FOR PART 99-7871 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Need help?
Do you have a question about the 99-7871 and is the answer not in the manual?
Questions and answers