Replacing the FlexBay Drive Panel Insert
1 Slide the drive panel insert tab into the slot on the bezel.
2 Push the panel insert towards the bezel till it snaps in place.
NOTE:
To comply with FCC regulations, it is recommended that you replace the
drive panel insert whenever the floppy drive is removed from the computer.
Media Card Reader
CAUTION:
safety instructions in the Product Information Guide.
CAUTION:
blades or other unexpected injuries, always unplug your computer from the
electrical outlet before opening the cover.
Removing a Media Card Reader
1 Follow the procedures in "Before You Begin" on page 103.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 105).
3 Remove the bezel (see "Removing the Bezel" on page 135).
150
Removing and Installing Parts
1
2
1
drive panel insert (optional)
Before you begin any of the procedures in this section, follow the
To guard against likelihood of electric shock, laceration by moving fan
2 slot