1
card retention door
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent the
computer cover from closing properly or cause damage to the equipment.
NOTICE:
To connect a network cable, first plug the cable into the network device and then plug it into the computer.
11 Before you close the card retention door, ensure that:
•
The tops of all cards and filler brackets are flush with the alignment bar.
•
The notch in the top of the card or filler bracket fits around the alignment guide.
1
alignment guide
4
card retention door
2
card retention mechanism
1
2
3
4
2
alignment bar
3
3
release tabs (2)
3
release tab
Removing and Installing Parts
1
2
79