Dell Dimension PY349 Owner's Manual page 115

Auto Power On
(Off default)
Auto Power Time
Low Power Mode
(Off default)
Cool and Quiet
(On default)
Suspend Mode
(S3 default)
Maintenance
Service Tag
Load Defaults
Event Log
POST Behavior
Fastboot
(On default)
Sets the computer to automatically turn on.
• Off — disables the Auto Power On feature
• Everyday — turns the computer on every day at the time set in Auto Power
Time
• Weekdays — turns the computer on every day from Monday through Friday
at the time set in Auto Power Time
NOTE:
This feature does not work if you turn off your computer using a power
strip or surge protector.
Sets time to automatically turn on the computer.
Time is kept in the standard 12-hour format (hours:minutes). Change the
startup time by pressing the right- or left-arrow key to increase or decrease the
numbers, or type numbers in both the date and time fields.
When Low Power Mode is selected, remote wakeup events will no longer
power up the computer from Hibernate or Off via the onboard network
controller.
This option enables or disables the Cool 'n' Quiet technology for all supported
processors
Sets the computer's suspend mode.
• S1 — sets the computer to a suspend state where the computer is running in
a low-power mode
• S3 — sets the computer to a standby state where the power is reduced or
turned off for most components; however, system memory remains active for
both settings
Displays the service tag for your computer.
Restores system setup options to their factory defaults.
Allows you to view the Event Log. Entries are marked R for Read and U for
Unread. Mark All Entries Read puts an
clears the Event Log.
When enabled, this feature reduces computer startup time by bypassing some
compatibility steps.
• Off — does not skip any steps during computer startup
• On — starts the system more quickly
to the left of all entries. Clear Log
R
115
Appendix