Setting Up A Printer; Printer Cable; Connecting A Parallel Printer - Dell Dimension J2936 Owner's Manual

J2936bk0.book Page 18 Tuesday, September 2, 2003 3:06 PM

Setting Up a Printer

NOTICE: Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
• Obtain and install updated drivers.
• Connect the printer to the computer.
• Load paper and install the toner or ink cartridge.
• Contact the printer manufacturer for technical assistance.

Printer Cable

Your printer connects to your computer with either a USB cable or a parallel cable. Your
printer may not come with a printer cable, so if you purchase a cable separately, ensure that
it is compatible with your printer. If you purchased a printer cable at the same time you
purchased your computer, the cable may arrive in the computer box.

Connecting a Parallel Printer

Complete the operating system setup, if you have not already done so.
1
Shut down the computer through the Start menu (see page 27).
2
NOTICE: For best results, use a 3-m (10-ft) or shorter parallel cable.
18
Setting Up and Using Yo ur Computer