Milwaukee MC110 User Manual

SPECIFICATIONS
Range 0.0 to 14.0 pH
Resolution 0.1 pH
Accuracy
±0.2 pH
(@25°C)
3.5 to 7.5 pH for MC110
Setpoint
5.5 to 9.5 pH for MC120 and MC122
active when measure is higher/lower
than selected setpoint depending on
Alarm
user selection
Output Power active when measure is higher/lower
Socket than selected setpoint (5A max)
(for MC122 only) depending on user selection
Power Drivers
115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz
(for MC122 only)
pH Electrode MA911B/2 (included)
Environment 0 to 50°C, 95% RH not condensing
Power Supply 12 VDC (included)
Dimensions 148.5 x 82.5 x 32 mm
MC110, MC120 160 g (meter only)
Weight
MC122 180 g
OPTIONAL ACCESSORIES
M10004B pH 4.01 buffer solution, 20 ml sachet (25 pcs)
M10007B pH 7.01 buffer solution, 20 ml sachet (25 pcs)
pH 10.01 buffer solution, 20 ml sachet
M10010B
(25 pcs)
Electrode rinse solution, 20 ml sachet
M10000B
(25 pcs)
Electrode storage solution, 20 ml sachet
MA9015
(25 pcs)
CERTIFICATION
Milwaukee Instruments conform to the CE
European Directives.
Disposal of Electrical & Electronic
Equipment. Do not treat this product
as household waste. Hand it over to the
appropriate collection point for the recycling
of electrical and electronic equipment.
Please note: proper product prevents potential
negative consequences for human health and the
environment. For detailed information, contact your
local household waste disposal service or go to
www.milwaukeeinstruments.com (USA & CAN) or
www.milwaukeeinst.com.
RECOMMENDATION
Before using this product, make sure it is entirely
suitable for your specific application and for the
environment in which it is used. Any modification
introduced by the user to the supplied equipment
may compromise the meter's performance. For your
and the meter's safety do not use or store the meter in
hazardous environment. To avoid damage or burn, do
not perform any measurement in microwave ovens.
WARRANTY
These instruments are warranted against defects in
materials and manufacturing for a period of 2 years
from the date of purchase. Probe is warranted for
6 months. This warranty is limited to repair or free
of charge replacement if the instrument cannot be
repaired. Damage due to accidents, misuse, tampering
or lack of prescribed maintenance is not covered by
warranty. If service is required, contact your local
Milwaukee Instruments Technical Service. If the repair
is not covered by the warranty, you will be notified of
the charges incurred. When shipping any meter, make
sure it is properly packaged for complete protection.
ISTMC110_07_20
USER MANUAL
RoHS
COMPLIANT
MC110, MC120, MC122
PRO Digital pH Controller
& Monitors
milwaukeeinstruments.com (USA & CAN)
milwaukeeinst.com
SATISFACTION
GUARANTEED