Page 1
JL24-SBAR/BKLD OWNER’S MANUAL MANUAL DEL USUARIO LOADED JEEP OVERHEAD SOUND BAR BARRA DE SONIDO DE TECHO CARGADA PARA JEEP LC-DRM DOWNLOAD DESIGNED FOR 2024 JEEPS: REQUIRED DIGITAL LIGHTS DESCARGUE LUCES SE REQUIERE EL APP DIGITALES LED EL LC-DRM ENGLISH | ESPAÑOL...
JL24-SBAR/BKLD LOADED JEEP OVERHEAD SOUND BAR BARRA DE SONIDO DE TECHO CARGADA PARA JEEP DESIGNED FOR 2024 DISEÑADO PARA JEEPS JL/JLU/JT JEEPS JL/JLU/JT 2024 • 4 X 8" NXL-IQ8/BK speakers included • 4 x 8" NXL-IQ8/BK altavoces incluidos • No modification to OEM dome light needed •...
Page 3
DISASSEMBLY INSTRUCTIONS / INSTRUCCIONES DE DESMONTAJE • Disconnect negative battery terminal. • Remove driver and passenger front roof panels per the vehicle’s owner’s manual. • Desconecte el terminal negativo de la batería. • Retire los paneles del techo delantero del conductor y del pasajero según el manual del propietario del vehículo.
Page 4
DISASSEMBLY INSTRUCTIONS / INSTRUCCIONES DE DESMONTAJE Unclip the two panels on the B-pillar sill panel (see Pictures 4 and 5). Then, remove the B-pillar sill panel. • Desenganche los dos paneles en el panel del umbral del pilar B (ver Imágenes 4 y 5).
Page 5
• Remove three bolts with a 10mm socket on the passenger side. Repeat on driver side. • Then remove soundbar from vehicle. NOTE - We recommend having additional helping hands for this step • Retire tres pernos con un dado de 10 mm en el lado del pasajero.
Page 6
4mm como se muestra en la imagen 10. Haga esto en ambos lados. • Install the DS18 soundbar using the bolts from the previous step. (Some help is needed.) Loosely install three bolts on the passenger side and repeat on the driver side.
• The final step is turning it up and becoming • El último paso es subirle el volumen y ser a part of the We Like It LOUD Crew. parte del grupo We Like It LOUD. INSTALLATION PLACEMENT / UBICACIÓN DE LA INSTALACIÓN JL24-SBAR/BKLD...
Page 8
Digital RGB lights into your system. Este kit esta diseñado para facilitar la instalación de tu barra de sonido JL24-SBAR/BKLD en tu JEEP JL / JLU / JT, especialmente cuando actualizas tu sistema de sonido e incorporas un amplificador y un modulo de luz (opcional).
(NO INCLUIDO) LC-DRM (NOT INCLUDED) OPTIONAL (NO INCLUIDO) OPCIONAL SOUNDBAR CONNECTOR FOR THE OEM LED MODULES CONECTOR PARA LOS MÓDULOS LED DE FÁBRICA DE LA BARRA DE SONIDO FACTORY OEM SOUNDBAR (JL24-SBAR/BKLD) SOUNDBAR CONNECTOR CONECTOR DE BARRA DE SONIDO DE FÁBRICA...
Page 10
3. Connect this to the amplifier (sold separately) 3. Conéctelo al amplificador (se vende por separado) used to power the DS18 soundbar. (Wh: CH1+, utilizado para alimentar la barra de sonido DS18. Wh/Bk: CH1-, Gy: CH2+, Gy/Bk: CH2-, Gr: CH3+, (Wh: CH1+, Wh/Bk: CH1-, Gy: CH2+, Gy/Bk: CH2-, Gr: Gr/Bk: CH3-, Vt: CH4+, Vt/Bk: CH4-).
15" / 381mm WARRANTY GARANTÍA Please visit our website DS18.com for more Visite nuestra página web DS18.com para obtener más information on our warranty policy. información sobre nuestra garantía. We reserve the right to change products and Nos reservamos el derecho de cambiar productos y specifications at any time without notice.
Page 15
FOR MORE INFORMATION PLEASE VISIT DS18.COM...
Need help?
Do you have a question about the JL24-SBAR/BKLD and is the answer not in the manual?
Questions and answers