Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on
the soundbar and the audio output on an audio
device.
2. The soundbar will automatically switch to Aux
Mode.
3. Use the controls on the connected device to
select and play audio. Be sure the volume on
your connected device is audible when you
begin playing. Only the volume control on the
soundbar will work in Aux In mode.
• Press the Power/Mode/Lights button twice to
cycle through LED light modes: breathing, fast
flash, slow flash, steady, and lights off.
• The LED lights have five colors: Red, Blue, Green,
Light Blue, and White.
To turn voice prompts on/off, press and hold the
Volume Down/Previous Track and Volume Up/
Next Track buttons at the same time for 5 seconds.
The soundbar will chime when voice prompts are
successfully turned on/off.
Aux In
Light Modes
Voice Prompts
Need help?
Do you have a question about the ISB184 and is the answer not in the manual?
Questions and answers