Satellite Connection - Hitachi C2565Tn Operating Manual

OFo} al al=reatlale Mm =>.4i-1aal-lMmUre(-reysAUelelcom =telelle]tat-Ja1!
Once you have connected your equipment as shown in the drawing on page 14,
proceed as follows.
Programme number selected
Ensure your equipment is connected to the
correct socket, i.e. AV1 scart for computers or
AV2 scart for S-VHS video recorders. 8
Y +
Use purple buttons or buttons 0 - 9 to select a 471. 18MHZ
programme number not already tuned to a T.V.
broadcast. ¥ s2 53 Of
Press BOTTOM red button to select external
input display.
I
Aerial Green Yellow
symbol
Press a green or yellow button to select
(computer inputs to AV1 scart) or S2 (S-VHS
inputs to AV2 scart). 8
The aerial symbol in display will then be replaced St2 +
by or S4v2. 471.18MHZ
NOTE: The S3 in the display represents the
S-VHS socket on the front of this T.V.
You need only select this should you desire to
view inputs from that socket on a specific
programme number every time.
s2 s3 Ot
Press © button to store.
Switch on external equipment to view.
Press a programme number tuned to a T.V.
broadcast when you wish to return to normal
viewing.
Every time you wish to view inputs from your external equipment, remember to first select the programme number chosen
in step 1.
If you wish to connect other external equipment to the remaining scart socket, select a new programme number, and repeat
this procedure. Don't forget to select this new programme number when playback is required from additional equipment.
'SATELLITE CONNECTION | |
Should you have a satellite ce
. Cg Satellite ©
receiver that you wish to connect to
the T.V. for viewing, and toa VCR
for recording, then we recommend
you connect them to the scart
sockets as shown.
Using this method, you can still
record satellite programmes whislt
the T.V. is switched OFF. Please — \ | Satellite
refer to your satellite and VCR ae "Receiver
operating guides, in conjunction =
with this operating guide. : Re SS ee Scart Connecter] ;
NOTE: Don't forget to allocate a mee
eee
[Sore]
| Connecter
programme number and scart
socket to each piece of equipment
as previously described.
16