Magnetismus 2 User Manual Page 5 Safety Instructions Read carefully before using the device. 1. Only use the device in permitted cord can create a fire risk or risk not continue to use the device. and functional outlets. of electric shock.
Page 6
Page 6 Magnetismus 2 User Manual Connections —————————————————————————————————————————-—–—— The device is equipped with an IEC socket. Use a compatible cable only. Read the Safety Instructions section for use before connecting the power cord. POWER AND FUSE Please see the Technical Data section for the appropriate fuse.
Page 7
Magnetismus 2 User Manual Page 7 Controls —————————————————————————————————————————-—–—— When in bypass mode, the signal is passed directly unprocessed from the input to the output. BYPASS Also, when switched off, the cream is in hard bypass mode due to the relays.
Turn MAKEUP GAIN until the VU METER reads 0dB at peaks Set OUTPUT as needed. Toogle bypass to hear the differences. Use this setting as a starting-point and begin to experiment. Video Tutorial: Please visit the Magnetismus 2 product page and watch the video turorials: https://www.tegeler.com/Magnetismus2/Index#Videos —————————————————————————————————————————-—–—— Tegeler.com...
Magnetismus 2 User Manual Page 9 Signal Flow Tegeler.com...
Page 10
Page 10 Magnetismus 2 User Manual VCA Compressor —————————————————————————————————————————-—–—— The Threshold sets the signal level at which the compressor kicks in. THRESHOLD A lower threshold will apply the gain reduction of the compressor to a larger portion of the signal.
Page 11
Magnetismus 2 User Manual Page 11 —————————————————————————————————————————-—–—— This control sets the ratio between the input level and the output level for signals above the threshold. OFF means that no compression is performed. LIMIT means that the output signal cannot exceed a certain value, even if the input signal increases in volume.
Page 12 Magnetismus 2 User Manual Transient Shaper —————————————————————————————————————————-—–—— With this control you can adjust the intensity of the transient processing. The further you turn the slider towards 10, the stronger the smoothing of the transients becomes. INTENSITY At 0 the processing is disabled.
Page 13
Magnetismus 2 User Manual Page 13 —————————————————————————————————————————-—–—— This switch determines the width of the transients that are still processed. Iron has the greatest width, nickel has the least. The following picture illustrates the processing of transients: FLUX MODE The transients are first emphasised by the VCA compressor and then smoothed by the transient shaper.
Additional Information ——————————————————————————————————-———————————————————————————————-—————–——————— In order to always ensure the highest audio quality, devices manufactured the Tegeler Audio Manufaktur GmbH are always adapted to match the current state of the art and technology. Changes in design, circuits, and controls are made without prior notice. For this reason, it is possible that the specifications and appearance of the device may differ slightly from those described in this document.
Page 15 Conformity CE Declaration of Conformity We, Tegeler Audio Manufaktur GmbH, of Weststr.1, 13405 Berlin, Germany, under the management of CEO Michael Krusch, certify and declare under our sole responsibility that the following product Description: Audio Compressor Manufacturer: Tegeler Audio Manufaktur GmbH...
Need help?
Do you have a question about the Magnetismus 2 and is the answer not in the manual?
Questions and answers