Holmatro CC 23 Maintenance Instruction

Maintenance Instruction
Concrete Crusher CC 23
Maintenance recommendations:
• Wear full protective gear during maintenance
• Always act according to the safety instructions as supplied with each tool!
Necessary equipment: WD-40, soft cloth, teflon lubrication oil, Molylube 26 HD-EP, Allen key's, punch, hammer
Contact the Holmatro dealer if one of the items does not function properly!
Step 1
• Check the general condition of the tool
• Check for oil leakage
• Check the readability of the identification/safety label, replace if
unreadable
• Check the arms for damage
• Clean/dry the tool with a soft cloth
Holmatro Rescue Equipment B.V. I P.O. Box 33
While the greatest care has been devoted to the content, it is possible that the information in this printed matter is incorrect or incomplete. N.V. Holmatro and its affiliated companies (hereafter: Holmatro)
cannot be held liable in any way for the consequences of activities undertaken on the basis of this printed matter. If you have any doubts about the correctness or completeness of the information, you shall
contact Holmatro. Nothing from this printed matter can be copied and/or made public in any way without he explicit authorization of Holmatro.
I 4940 AA Raamsdonksveer, the Netherlands
Step 2
• Check the deadman's handle for proper functioning
• Check if the control handle moves smoothly
• Check if the control handle returns to the neutral position
• Chech if the dust cap is firmly attached
• Check if the coupler functions correctly
• Check the coupler for dirt and oil leakage
• Clean coupler with a soft cloth. If necessary with water and soap
• If necessary grease with WD-40
I T +31 (0)162 589200 I rescue@holmatro.com
After use (every time)
Revision 02-17
I www.holmatro.com
1