Parameter Descriptions; Time/Date; Drives - NEC VERSA 6000 Series Service Manual

2-24 Setup and Operation
PARAMETER
Serial Timeout
Standby Timeout
Suspend Mode
Auto Suspend
Timeout
Auto Save to File
Suspend Warning
Tone
PCMCIA Power
Video Highlight
Modem Ring Resume
Wake from Suspend at:
* Visible only when notebook is docked.
** For Windows 95, the initial setting is "Reconfigurable." Selecting "Select Default Values" in the
Exit menu sets these settings to the defaults listed here. Do not use "Reconfigurable" with non-plug and
play systems, (such as Windows for Workgroups or DOS). Doing so disables the device.
+ Can be in the docking station or VersaBay II.

Parameter Descriptions

Read the following for an understanding of each parameter's function.

Time/Date

Use this option to set the time and date. The settings remain in memory even after you turn
off system power.
To set the time, enter the current hour, minute, and second in hh:mm:ss, 24-hour format.
Use the Tab key to move from field to field. For example, type 13:30:00, tabbing from field
to field for 1:30 p.m.
To set the date, enter the current day, month, and year in mm/dd/yyyy format.

Drives

The Drives option lets you check or change parameters for your diskette drive, hard disk
drive, the CD-ROM reader and docking station hard drives.
Table 2-6 Setup Parameters
DEFAULT
SETTING
On
4 min.
Suspend
10 min.
On
On
On
Standard
Off
0:00:00
NOTE: When setting the time and date, enter
preceding zeroes. For example, to enter 9:20
a.m. and February 4, 1996, type 09:20:00 and
02/04/1996.
ALTERNATE
SETTINGS
Off
1/2/4/6/8/12/15 min/Off
Save to File/Suspend Only
5/10/15/20/25/30/34 min/Off
Off
Off
Off
Full
On