Automatic Power-Saving Features - NEC VERSA 4000 Service Manual

AUTOMATIC POWER-SAVING FEATURES

Table Section 2-7 lists the NEC Versa 4000 series automatic power conserving features.
These features work during battery and AC operation. The features listed below do not
work when the optional docking station is connected.
The default timeouts listed below can be changed using Setup.
Use the Fn F7 key combination to set the power management level. You can toggle be-
tween Highest Performance, Longest Battery Life, Custom Values, and Off. You can mod-
ify the custom level for your specific working environment using Custom Values. Default
values change depending on the type of power management you use.
Table Section 2-7
Device
LCD backlight
Hard Disk
Suspend Mode
Automatic Power-Saving Features
Default (timeout) Description
2 min. When no keyboard or NEC VersaGlide input
occurs for the specified timeout, the LCD
backlight shuts off.
10 sec. Hard disk motor stops when not accessed for
specified timeout.
5 min. The system enters Suspend mode after total
system activity.
Setup and Operation 2-27