Table of Contents
Advertisement
Page 2
Fan High Speed Mode
This option allows you to select two modes for fan speed :
high-speed mode and normal speed mode.
When you wish to cool down the temperature inside the
projector quickly, check this box. This is convenient especially
when the projector is installed on the ceiling.
Page 3
Remote Sensor
(MT series only)
This option determines which remote sensors n the projector
are effective in wireless mode.
The options are : front, rear, right, or left. Checked sides show
that they can accept the infrared signal from the supplied
remote control.
S-Video Mode Select
This feature is used to select the S-Video signal detection
mode. This allows identifying of the S-Video signals with
different aspect ratio (Zoom 16 : 9, Wide Zoom 4 : 3).
S1
Identifies a Zoom signal only.
S2
Identifies a Zoom or Wide Zoom signal.
Off
Does not identify any S-Video signal.
previous page
(MT series only)
(MT series only)
next page
Advertisement
Table of Contents
