Table of Contents Warning! Safety Instructions Adjusting the Angle of the TV to suit view Preparing Using Remote Control Separate Purchase Troubleshooting 6 Wall Mounting Bracket Lifting and moving the TV Settings Mounting on a Table Specifications 8 Attaching the TV to a Desk 19 HDMI-DTV supported mode 8 Using the Kensington security system 19 HDMI-PC supported Mode...
Warning! Safety • Do not place the TV and/or remote control in the following environments: Instructions - Keep the product away from direct sunlight. - An area with high humidity such as a bathroom. - Near any heat source such as stoves and other devices that produce heat.
Page 4
Ensure that you connect the earth • Use only an authorised attachments / accessories ground wire to prevent possible electric shock. approved by LG Electronics. Otherwise, this may • Never touch this apparatus or antenna during a result in fire, electric shock, malfunction, or lightning storm.
Preparing • Never disassemble the AC adapter or power cord. This may result in fire or electric shock. • Handle the adapter carefully to avoid dropping or • If the TV is turned on for the first time after it striking it.
Separate Purchase Lifting and moving the TV Separate purchase items can be changed or Please note the following advice to prevent the modified for quality improvement without any TV from being scratched or damaged and for safe notification. Contact your dealer to buy these transportation regardless of its type and size.
Mounting on a Table • When transporting the TV, do not expose the TV to jolts or excessive vibration. • When transporting the TV, keep the TV upright, (Depending on model) never turn the TV on its side or tilt towards the 1 Lift and tilt the TV into its upright position on left or right.
Attaching the TV to a Desk Using the Kensington security system (Depending on model) The TV should be attached to a desk so it cannot (Depending on model) be pulled in a forward/backward direction, The Kensington security system connector is potentially causing injury or damaging the product.
We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket,...
Page 10
• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. (Depending on model) • For more information of screws and wall mount bracket, refer to the Separate purchase. • If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product.
Connections Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external Connect various external devices to the TV device and the TV with the HDMI cable. Some and switch input modes to select an external separate cable is not provided.
External Speakers External Devices Available external devices are: Blu-ray player, HD (Depending on model) receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. • The external device connection may differ from the model. •...
Network Method of volume control port (Depending on model) (Depending on model) • Cable Spec. Wired network connection Each up/ This TV can be connected to a Pro:Centric server down pins are via the port. After making the physical connected to connection, the TV needs to be set up for network CPU with pull communication.
Adjusting the menu Connect the port of the Modem or Router to the port on the TV. Connect the port of the PC to the (Depending on model) port on the TV. (Depending on model) When the TV is turned on, press the button one •...
Using Remote Control * To use the button, press and hold for more than 3 seconds. The descriptions in this manual are based on the (POWER) Turns the TV on or off. buttons on the remote control. Please read this Selects Radio, TV and DTV manual carefully and use the TV correctly.
Troubleshooting • Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. The software version can be updated for • Failure to match the correct polarities of improvement in performance. the battery may cause the battery to burst Customer needs to ensure the compatibility or leak, resulting in fire, personal injury, or of customer’s equipment with LGE software.
Abnormal display • When cleaning the product, be careful not to allow any liquid or foreign objects to • If the product feels cold to the touch, there may enter the gap between the upper, left or be a small “flicker” when it is turned on. This is right side of the panel and the guide panel.
HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported. Horizontal Vertical • Use HDMI IN 1 for PC mode. (Depending on Resolution Frequency Frequency model) (kHz) (Hz) 31.46 59.94 Horizontal Vertical 640 x 480p 31.50 60.00 Resolution Frequency Frequency 31.46...
• ULTRA HD Video: 3840 x 2160, 4096 x 2160 Extension Codec • Some HEVC encoded ULTRA HD videos other than the content officially provided by LG VC-1 Advanced Profile Electronics may not be played. Video (except for WMVA), VC-1 Simple and Main Profiles .asf...
LG Electronics will also provide open source code The terms HDMI, HDMI High-Definition to you on CD-ROM for a charge covering the Multimedia Interface, HDMI trade dress and...
IR Codes • This feature is not available for all models. Code (Hexa) Function Code (Hexa) Function (POWER) (INPUT) 10-19 Number Buttons 0-9 (MUTE) (HOME) (SETTINGS)
External Control Device ▶ B Type Setup RS-232C IN (CONTROL & SERVICE) RS-232C Setup (Depending on model) • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s (*Not Provided) functions externally.
RS-232C Configurations Communication Parameters • Baud rate: 9,600 bps (UART) 7-Wire Configurations • Data length: 8 bits (Standard RS-232C cable) • Parity: None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable. Set ID For [Set ID] number, see "Real data mapping".
Command Reference List (Depending on model) Command1 Command2 Data (Hexadecimal) 1 Power 00 to 01 2 Aspect Ratio (page 27) 3 Screen Mute (page 28) 4 Volume Mute 00 to 01 5 Volume Control 00 to 64 6 Contrast 00 to 64 7 Brightness 00 to 64 8 Colour...
Transmission / Receiving Protocol 1 Power (Command: k a) ▶ To control Power On/Off of the set. (Depending on Model) Transmission Transmission (k)(a)( )(Set ID)( )(Data)(Cr) (Command1)(Command2)( )(Set ID)( )(Data)(Cr) (Command1) : First command to control the TV. (j, Data 00 : Off k, m or x) Data 01 : On (Command2) : Second command to control the TV.
Page 28
3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ▶ To select screen mute on/off. ▶ To adjust screen contrast. You can also adjust contrast in the picture Transmission settings. (k)(d)( )(Set ID)( )(Data)(Cr) Transmission Data 00 : Screen mute off (Picture on) / Video (k)(g)( )(Set ID)( )(Data)(Cr) mute off Data Min : 00 to Max : 64...
Page 29
9 Tint (Command: k j) 12 Remote Control Lock Mode (Command: k m) ▶ To adjust the screen tint. ▶ To lock the front panel controls on the monitor You can also adjust tint in the picture settings. and remote control. Transmission Transmission (k)(j)( )(Set ID)( )(Data)(Cr)
Page 30
15 Energy Saving (Command: j q) 17 Equalizer (Command: j v) ▶ To reduce the power consumption of the TV. You ▶ To adjust equalizer. can also adjust Energy Saving in picture settings. Transmission Transmission (j)(v)( )(Set ID)( )(Data)(Cr) (j)(q)( )(Set ID)( )(Data)(Cr) Power Saving Level Function...
Page 31
18 Tune Command (Command: m a) 19 Programme Skip / Add (Command: m b) ▶ Select channel to following physical number. ▶ To set skip status for the current Programme. Transmission Transmission (m)(a)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data (m)(b)( )(Set ID)( )(Data)(Cr) 02)(Cr) Data 00 : Skip...
Page 32
22 Input select (Command: x b) (Main Picture 23 Programme block/unblock (Command: m d) Input) ▶ This command may work differently depending ▶ To select input source for main picture. on model and signal. Transmission (For South Korea, North/Latin America except (x)(b)( )(Set ID)( )(Data)(Cr) Colombia Model) Data Structure...
Page 33
(For all other regions including Colombia, Excluding 24 Fail Over Mode (Command: m i) the above countries) ▶ Selects the Fail Over mode. Transmission Transmission (m)(d)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data (m)(i)( )(Set ID)( )(Data)(Cr) 02)(Data 03)(Data 04)(Cr) Data 00 : Off (Data 00) : Physical Channel Number Data 01 : Auto...
Page 34
26 Internal storage media contents play * Real data mapping (Command: s n, a8) 00 : Step 0 ▶ Plays media stored in the internal memory. ▶ This command may work differently depending Step 10 (Set ID 10) on model and signal. Transmission Step 15 (Set ID 15) (s)(n)( )(Set ID)( )(a)(8)( )(Data)(Cr)
Page 35
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial no.
Need help?
Do you have a question about the 43UN340C0LD.AEU and is the answer not in the manual?
Questions and answers