Using Compactflash™ Cards; Using Pc Cards - NEC MOBILEPRO 770 Important Information Manual

Note:
MobilePro Online Help file, you cannot customize
the application shortcut keys on the MobilePro
770.
Using CompactFlash™ Cards
If you have a CompactFlash card installed in your NEC
MobilePro and the system is in a suspended state, only use
(press) the Power button located at the top right of the
keyboard to resume the system from suspend. Do not use any
other key to resume operation.
Using IrDA (infrared) Communication
Before using the NEC MobilePro for IrDA communication,
first configure/enable the IR port on your host system, then
install Windows CE Services on your host system.
Note:
on your host system after installing Windows CE
Services, you must re-install Windows CE
Services before establishing IrDA communication
between systems.

Using PC Cards

When using a type NE2000 PC card in your NEC MobilePro,
do not install the card drivers as suggested in the MobilePro
Online Help file. The required drivers are pre-installed in the
MobilePro's ROM.
6 NEC MobilePro 770 Important Information
Contrary to the information in the
If you configure/enable the IrDA port
MobilePro 770
Important Information
818-200576-000
1/99