Changing Message Delivery Options - NEC ELITEMAIL CTI User Manual

Changing Message Delivery Options

The system can dial up to four different telephone numbers to deliver your messages. You can set a range
of minutes, hours, and days that a message delivery telephone number is in effect.
You can tell the system to deliver only urgent messages or to delay any of the delivery numbers. This
causes the system to try one delivery number first, then to try others only if necessary.
Entering a pager number may require special dialing characters that are unavailable on a telephone (for
example, a semicolon that represents a 3-second pause). Contact your system manager for assistance.
Use the form below to plan your telephone numbers and schedules for message delivery.
Enter # to insert a 1-second pause where you want the system to pause between digits dialed.
Fill in your message delivery numbers and schedule.
WORK PHONE
(OR EXTENSION)
HOME PHONE
PAGER PHONE
SPARE PHONE
FAX PHONE
To change message delivery
1. Access your mailbox.
2. To change your message delivery options for your:
H work phone, enter 7 6 6 5 4.
home phone, enter 7 6 6 5 5.
H
H pager, enter 7 6 6 5 6.
H spare phone, enter 7 6 6 5 7.
H fax phone, enter 7 6 6 5 8.
3. Enter 1 to turn on delivery for that number or 2 to turn off delivery.
4. Enter 4 to change the telephone number. After you enter a telephone number, enter
entry.
5. Enter 5 to change the schedule, and then follow the system instructions. Enter 1 for Yes, 2 for No.
6. Enter 6 to change the delivery mode for messages delivered to this number, and then follow the
system instructions. Enter 1 for Yes, 2 for No.
7. Enter 7 to change fax notification, and then follow the system instructions. Enter 1 for Yes, 2 for No.
8. Change any remaining message delivery numbers by repeating the procedure.
(Number) (Time)
FROM
FROM
FROM
FROM
FROM
1 1
(End Time)
TO S M T W T F S
TO S M T W T F S
TO S M T W T F S
TO S M T W T F S
TO S M T W T F S
, to end the