Haier 300 Series User Manual page 25

NZ AU
Start a Program with Delay
Set a start time by the following procedure in order to delay a program
start:
1. Set a program.
2. Press the reservation button
delay time (from 1 to 24hours).
3. Press the START/PAUSE button
► The display shows the countdown of the start delay.
► When the countdown is completed, the program starts.
Cancel a Delayed Start
When the current reservation time is displayed for 24 hours,
press the reservation
Afterwards,the display shows the duration time for the set program.
Cancel Start Delay Program
Press the ON/OFF button
The start delay is cancelled.
The program is aborted.
The appliance is switched off.
Start a new program and a delayed start if needed.
CAUTION!
If a program is aborted in the process of washing dishes，the
residue of detergent remains on the dishes. These can cause
damage to health. Make sure to rinse off the detergent residues
completely before using these dishes again.
If the door is opened immediately after the end of program, hot
steam can escape. The danger of scalding. Open the door carefully.
Make sure that there is detergent in the detergent dispenser before
starting a new program.
until the display shows the required
.
button again to cancel the reservation.
for about 1 second.
Daily Use
24