Start A Program - Haier 300 Series User Manual

Daily Use

Start a Program

1. Close the door.
2. Press the ON/OFF button
3. Press the program
program indicator flashes.
Additionally the display shows the program run-time.
4. If need select a start time for a delayed start, re fer to the section START
A PROGRAM WITH DELAY.
5. Press the START/PAUSE button
start.
The program starts.The display acts now as a countdown of the
remaining run-time.
The appliance remembers the last programme you used.The
next time the appliance is switched on, the appliance pre-selects
the programme used last time.
Interrupt a Running Program
To interrupt a running program:
Press the START/PAUSE button
is flashing.
Open the door.
To continue a paused program:
Close the door and press the button
from the point of interruption.To prevent poor wash performance, do not
leave the door open for a long time.
23
.
button
you want to select and then the required
to activate the program or the delay
. The displayed cycle time
to continue the program
NZ AU