Child Lock - Haier 300 Series User Manual

Before first use
How to Adjust Settings
Adjust the Rinse Aid level
1. The appliance is switched on.
2. Press and hold
The display shows the current Rinse Aid setting (the default is
3. Press to change the Rinse Aid setting in steps between
(minimum dispense,no rinse aid is set) and
represents putting in 6ml rinse aid).
4. Press to save the option.
5. To exit the Rinse Aid menu, press and hold
Activate / De-Activate the Buzzer
1. The appliance is switched on.
2. Press and hold
The display shows the current Rinse Aid setting.
3. Press to scroll to the buzzer menu.
4. The display will show
5. Press to toggle between
6. Press to save the option.
7. To exit，press and hold

Child Lock

This feature disables all the buttons onthe dishwasher. If any other buttons
are pressed while Child Lock is activated, the Child Lock indicator will
flash for a few seconds.
1. To activate Child Lock, press
2 . The display will remain on (if no programme has been started it will
continue to flash while the control panel is locked).
3. To cancel Child Lock, press
17
about 3 seconds until:
for about 3 seconds until :
(buzzer off) or
(buzzer off) or
1 second.
and
and
(maximum dispense,
for 1 second.
(buzzer on).
(buzzer on),
for 3 seconds.
for 3 seconds.
NZ AU
).