Setting Up a Network
Physically Connecting to a Network or Broadband Modem
Before you connect your computer to a network that is not wireless, the computer must have a
network adapter installed and a network cable connected to it.
To connect a network cable:
1 Connect the network cable to the network adapter connector on the right side of your computer.
NOTE:
Insert the cable connector until it clicks into place, and then gently pull the cable to ensure that it is
securely attached.
2 Connect the other end of the network cable to a network connection device or a network wall
connector.
NOTE:
Do not use a network cable with a telephone wall connector.
Network Setup Wizard
®
The Microsoft
Windows
through the process of sharing files, printers, or an Internet connection between computers in a
home or small office.
1 Click the Start button, point to Programs→ Accessories→ Communications, and then click
Network Setup Wizard.
2 On the welcome screen, click Next.
®
XP operating system provides a Network Setup Wizard to guide you
Setting Up a Network
71