HermanMiller Verus Manual

Setting Up

Seat Height: Paddle-shaped lever on right side

	To raise: While taking your weight off chair, lift lever up.
	To lower: While seated, lift lever up.

At the proper height, your feet should rest flat on the floor.

Tilt Lock: Knob/Level below left side of seat
Available on Self-adjusting tilt (3), (4) & Tilt with tension control (8).

	To lock the tilt: Tilt (3 & 4) Push down the lever to lock the backrest in place at one of the preset angles.
	Tilt (8) Turn anticlockwise to lock the backrest in place at one of the preset angles.
	To unlock the tilt: Tilt (3 & 4) Pull up the lever to unlock the tilt.
	Tilt (8) Turn the knob clockwise to unlock the tilt.

Engage the tilt lock when you want to lock the backrest in an upright or one of the preset angles.

Seat Depth: Lever under right side of seat

	To increase depth: Pull lever out, slide thighs forward to adjust seat, release lever.
	To decrease depth: Pull lever out, push seat back and release lever.

In the proper position, you will have approximately three-fingers of clearance between the back of your knees and the seat edge.

Tilt Limiter: Knob below right side of seat
Available on Self-adjusting tilt (5).

	To limit tilt range: Turn clockwise to limit the level of recline
	To release tilt limiter: Turn anticlockwise to increase the level of recline

Tilt Tension: Long stem on right side with knob
Available on Tilt (8) Tension control with tilt lock.

	To increase tension: While seated, turn knob forward (toward + sign).
	To decrease tension: While seated, turn knob backward (toward – sign).

Set the tilt tension to control the resistance you feel when leaning back.
For the Self-adjusting Tilt with the Tilt lock or Tilt limiter, the tension is pre-loaded to adjust to the user.

Arm Depth & Width:
Only available on some models.

	To adjust arm depth: Grasp arm pad, push forward or back to desired position.
	To adjust arm width: Grasp armpad and pull in or push out.

Headrest Height: Move headrest to adjust
Only available on some models.

To adjust height on headrest: Grasp the headrest and move up or down to adjust the height to meet your preferred level of comfort.

Lumbar Height: Lever on adjustable lumbar support
Only available on some models.

	To adjust height on suspension back: Slide lever up and down to desired height.
	To adjust height on TriFlex back: Slide adjustable back support up and down to desired height.

Arm Height: Button located on arm stalk under each arm pad

To raise or lower arm: Push button and pull arms up or down to desired height.

For maximum comfort, your arms should make contact with the armpad without any lift at your shoulders.