1
modem screw
4
modem
4 Install the replacement modem:
Connect the modem cable to the modem.
a
NOTICE:
The connector is keyed to ensure correct insertion. If you feel resistance, check the connector and
realign the card.
Align the modem with the screw holes and press the modem down into the connector on the
b
system board.
Replace the screw that secures the modem to the system board.
c
5 Replace the modem cover.
Hinge Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as a connector on the back of the computer).
118
Adding and Replacing Parts
5
4
2
modem pull-tab
5
modem cable
1
3
2
3
modem connector on system
board