Quail Digital Pro11 Instruction Manual page 5

Step 4 — Registering
•
To register a headset to the base, take
one headset at a time from the charger
and hold the outside face of the headset
up to the underside of the base.
•
The base LED will flash AMBER, then
AMBER
go solid when the headset is
registered.
•
Place the headset back in the charger
and repeat the process with the next
headset.
•
Leave all headsets in the charger for
two minutes to synchronise with each
other.
(figure 8)
figure 8
5