Dell BT-308 Owner's Manual page 104

I cannot find a location
I cannot hear the guidance
instructions
My map is stuck in map panning
mode
I cannot load an additional map
There is not enough memory to
install my map
102
Owner's Manual
• Check that the address is entered
correctly.
• Check that the appropriate map for
the address is loaded.
Sometimes an address is not stored in the
database. NAVTEQ is always updating the
map content. To provide feedback and add a
new address complete a Feedback Form on
www.dell.com/go/aximnavigation.
• On the map, check the speaker icon at
the bottom of the screen. Tap the icon
to unmute the instructions.
• Tap Options and then tap Guidance
Volume. Increase the volume and then
tap OK.
Tap the red X in the lower right corner. You
return to the Map view.
• Before installing additional maps,
verify that the Navigation System is
not running. From the Start menu, tap
Settings >System > Memory. On the
Running Programs tab, tap Nav
System > Stop.
• Verify that there is sufficient memory
available on your Pocket PC or selected
storage card.
• Select a smaller map to install. Install
maps by City rather than by Region.
• Install an additional SD or CF card in
the expansion slot.
• Remove programs from your Pocket
PC main memory to make space
available