Download Print this page

Roper Rhodes ACADEMY ACY6F Series Instructions

Floor mounted unit

Advertisement

Quick Links

FURNITURE AFTERCARE INSTRUCTIONS
As with all wooden furniture, this product should be treated with care.
We recommend...
Wipe away any water splashes or
condensation after use. Excessive exposure to
water will deteriorate the furniture.
WIPE AWAY
All bathrooms should be well ventilated with a
suitable extractor fan.
Clean with a soft damp cloth only.
For removal of lime scale deposits use a
suitable proprietary cleaner. If necessary test
on an inconspicuous area first.
Replacement Components
Should you require any replacement components for this product please contact Roper Rhodes using the contact details below.
SAFETY NOTICE
The unit and basin should be fully secured to a suitably reinforced wall to ensure stability. The wall plugs supplied are only suitable for
solid stone/brick walls. For plasterboard walls use specialist wall plugs along with supplementary wall strengthening as units can be very
heavy. Seek advice from a specialist about the suitability of fixings to be used.
Wear suitable eye protection when drilling. Take care when using power tools near water - the use of a residual current device (RCD) is
recommended. Beware of hidden pipes or cables. Take care when drilling tiled surfaces as the drill might slip. Use a piece of masking
tape to prevent the drill from wandering.
BASIN INSTALLATION
- Apply a bead of silicone to the basin on 2 sides to fix to and protect the side
panels as per figure 1.
- Typically the basin also has a silicone bead along the back edges where it
meets the wall (not shown)
- The basin should be held in place while the silicone cures.
PAGE 1 OF 4
(Once all plumbing is complete)
Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF
Tel:01225 303 900 | Fax: 01225 448 877
Email: sales@roperrhodes.co.uk | Web: www.roperrhodes.co.uk
Please DO NOT...
Do not scrub or scour
CREAM
Do not use abrasive cleaning agents
CLEANER
BLEACH
CLEANER
ACADEMY
FLOOR MOUNTED UNIT
ACY6F.x, ACY8F.x & ACY10F.x
Please retain for future use
Figure 1
RR-ACADEMY REV 1: GW/10/2019

Advertisement

loading
Need help?

Need help?

Do you have a question about the ACADEMY ACY6F Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Roper Rhodes ACADEMY ACY6F Series

  • Page 1 Replacement Components Should you require any replacement components for this product please contact Roper Rhodes using the contact details below. SAFETY NOTICE The unit and basin should be fully secured to a suitably reinforced wall to ensure stability. The wall plugs supplied are only suitable for solid stone/brick walls.
  • Page 2 Figure 8 ONCE ALL ADJUSTMENTS MADE - RE-TIGHTEN LOCKING SCREWS AND REPLACE COVER CAPS Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF Tel:01225 303 900 | Fax: 01225 448 877 Email: sales@roperrhodes.co.uk | Web: www.roperrhodes.co.uk PAGE 2 OF 4...
  • Page 3 To make adjustment 3 (see Figure 10) simply turn screw C Figure 11 Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF Tel:01225 303 900 | Fax: 01225 448 877 Email: sales@roperrhodes.co.uk | Web: www.roperrhodes.co.uk PAGE 3 OF 4...
  • Page 4 - Make small 1mm pilot holes at approximately 2mm depth. - Using screws provided with handles, fix in place. Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF Tel:01225 303 900 | Fax: 01225 448 877 Email: sales@roperrhodes.co.uk | Web: www.roperrhodes.co.uk...

This manual is also suitable for:

Academy acy8f seriesAcademy acy10f seriesAcademy acy10f.w