Set The Sleep Timer; Listen To An External Device; Upgrade Firmware - Philips 3000 Series User Manual

Activate/deactivate alarm timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate
timer.
If timer is activated, TIMER is
displayed.
In standby, you may press and hold
CLOCK to toggle clock display on or
off.

Set the sleep timer

This music system can switch to
standby automatically after a set period
of time.
When the music system is turned
on, press SLEEP/TIMER repeatedly
to select a set period of time (in
minutes).
When sleep timer is activated,
SLEEP is displayed.
To deactivate sleep timer
Press SLEEP/TIMER repeatedly
until [OFF] (sleep off) is displayed.
When sleep timer is deactivated,
SLEEP disappears.
Listen to an external
device
You can listen to an external device
through this unit with an MP3 link cable.
Connect an MP3 link cable (not
supplied) between:
AUDlO IN jack (3.5 mm) on the
product.
And the headphone jack on an
external device.
Press AUDlO IN repeatedly to select
AUDIO IN Source.
Start to play the device (see the
device user manual).

Upgrade Firmware

To get the best features and support,
update your product with the latest
�rmware version.
The �rmware for MCU can be upgraded
to the latest version via Philips
Entertainment app.
Please go to Firmware Update and press
Download & Update. If the upgrade is
released, the Download & Upgrade icon
can be pressed to proceed automatically.
Once this product is connected to Philips
Entertainment app, it can receive
over-the-air �rmware update. Always
upgrade with the latest �rmware version to
improve the performance of this product.
EN 17