Get Started; Connect Speakers; Connect Power - Philips 3000 Series User Manual

3 Get started

Caution
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation
Always follow the instructions in this
chapter in sequence.

Connect speakers

Note
Insert the stripped portion of each speaker
Wire into the socket completely.
For better sound quality, use the supplied
speakers only
1
Connecting one speaker, �nd the
sockets on the back of the main unit
marked "R".
2
Insert the red wire into the red (+)
socket, and the black wire into the
black (-) socket.
3
Connecting another speaker, �nd the
sockets on the main unit marked "L".
4
Repeat step 2 to insert the left
speaker wire.
To insert each speaker wire:
1
Hold down the socket �ap.
2
Insert the speaker wire fully.
3
Release the socket �ap.

Connect power

Caution
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the
underside of the unit.
Risk of electric shock! Before you plug the
AC power cord, make sure that the plug is
�xed securely, when you unplug the AC
power cord, always pull the plug, never pull
the cord.
Before you connect the Ac power cord,
make sure that you have completed all the
other connections.
Connect the power cable to the wall
socket.
EN 9