Pairing It With Your Phone - Jabra STONE User Manual

PAIRInG It WItH YoUR PHone

Headsets are connected to phones using a procedure called
'pairing' . by following a few simple steps, a phone can be paired
with a headset in a matter of seconds .
1 Put the headset in pairing mode
1 .a First time pairing
- take the headset out of the portable charging unit . the
headset will automatically start up in pairing mode (showing
flashing blue light on the Jabra StatusDisplay
searching for a device .
1 .b Pairing with another phone or re-pairing
- take headset out of the portable charging unit . turn the
headset off by long press on answer/end button . turn the
headset on again by long press on answer/end – keep pressing
until StatusDisplay
2 Set your
- Follow your phone's instruction guide . First make sure that
is activated on your mobile phone . then set your
phone to discover the headset . this usually involves going
to a 'setup, ' 'connect' or '
selecting the option to 'discover' or 'add' a
3 Your phone will find the Jabra STonE
- the phone will find the headset under name "Jabra Stone" .
- Your phone then asks if you want to pair with the headset .
- accept by pressing 'Yes' or 'oK' on the phone . If your phone
asks for passkey or PIn confirm with 0000 (4 zeros) . Your phone
will confirm when pairing is complete . Jabra Stone supports
version 2 .1 including Simple Secure Pairing meaning
that the headset can be paired with a phone or other
device without using PIn or passkey but only if the other
device supports
CONNECTIVITY
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
SELECT
* refer to phone's user manual
show flashing blue light .
tM
phone to 'discover' the Jabra STonE
DEVICES FOUND
Jabra STONE
SELECT
Jabra Stone
) and start
tM
' menu on your phone and
version 2 .1 also .
Jabra STONE
Passkey:
****
OK
device .*
HANDSFREE
Jabra STONE
added.
The handsfree is
now ready for use
SELECT
6