Cardin SSB-T9K4 Programming Manual

Programming of the keyboard on a receiver or on an electronic programmer: Programming of the keyboard on a receiver or on an electronic programmer
Connect the battery cable to the inside of your new code keyboard. Connect the battery cable to the inside of your new code keyboard
Modifying the password:
The original password is "123456". The original password is "123456"
1. Enter the following sequence on your Enter the following sequence on your keyboard: **your previous password
emits a small beep and the red and green LED lights go on emits a small beep and the red and green LED lights go on.
2. While the red LED light remains lit constantly and the green LED flashes, enter your new While the red LED light remains lit constantly and the green LED flashes, enter your new While the red LED light remains lit constantly and the green LED flashes, enter your new
password (maximum 6 digits) and finish with * password (maximum 6 digits) and finish with *. The keyboard emits a beep and the red and
greed LED lights remain lit constantly. greed LED lights remain lit constantly.
3. The modification of your password is successful The modification of your password is successful.
Complete deletion of the memory: Complete deletion of the memory
1. Enter the following sequence on your keyboard: *##password*. The keyboard emits a beep, Enter the following sequence on your keyboard: *##password*. The keyboard emits a beep, Enter the following sequence on your keyboard: *##password*. The keyboard emits a beep,
the red and green LED lights flash green LED lights flash. The keyboard emits a second beep and the green LED
lights up.
2. Your keyboard's memory has been deleted (except for the password) Your keyboard's memory has been deleted (except for the password).
Saving a personal code:
1. Enter the following sequence on your keyboard: password*. The red and green LED Enter the following sequence on your keyboard: password*. The red and green LED lights Enter the following sequence on your keyboard: password*. The red and green LED
flash, the keyboard emits a beep and the red LED lights up alone. flash, the keyboard emits a beep and the red LED lights up alone
2. Enter your new personal code and finish by entering *. This new code must be different from Enter your new personal code and finish by entering *. This new code must be different from Enter your new personal code and finish by entering *. This new code must be different from
your password. The keyboard emits a beep and the red and green LEDs light up.
3. In the following 10 seconds, press one or several of the functions A, B, C or D depending on wing 10 seconds, press one or several of the functions A, B, C or D depending on wing 10 seconds, press one or several of the functions A, B, C or D depending on
the button you use on the remote control that is already programmed. the button you use on the remote control that is already programmed
http://www.remotecontrol-express.com
Programming Manual
CARDIN SSB T9K4
The keyboard emits a second beep and the green LED
The keyboard emits a beep and the red and green LEDs light up. The keyboard emits a beep and the red and green LEDs light up.
express.com - TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
your previous password*. The keyboard
rd emits a beep and the red and
+44 (0) 207 927 3151