Kohler BARDON K-4915T-2Y Installation Instructions Manual

Touchless wall hung urinal

Hide thumbs

page of 12

/ 12
Bookmarks

Quick Links

Download this manual

BEFORE YOU BEGIN

A. HOW TO USE THESE INSTRUCTIONS

Please read these instructions carefully to familiarize

yourself with the required tools, materials, and installation

sequences. Follow the sections that pertain to your

particular installation. This will help you avoid costly

mistakes. In addition to proper installation, read all

operating and safety instructions.

All information in these instructions is base upon the latest

product information available at the time of publication.

Kohler China reserves the right to make changes in

product characteristics, packaging, or availability at any

time without notice.

The illustrations of product in this manual are only for

reference.

These instructions contain important care, cleaning, and

warranty information-

consumer

B. NOTES

Observe all local plumbing and building codes.

Stop Valve has a 1/2" NPT inlet supply connection.

· Fixture dimensions are nominal and conform to tolerances

established by ASME Standards (A112.19.2-2018).

The product complies with GB 6952-2015, GB 28377-

2019.

C. REQUIRED TOOLS AND MATERIALS

Open end/adjustable wrenches

Supply piping and connectors

Tape measure

Thread sealant tape

Basin Wrench

Screw driver

D. ROUGHING-IN

Turn off cold water supplies.

Install or relocate supply tubing and waste pipe to conform

to roughing-in dimensions.

See Fig. #1

for DC roughing-in dimension requirements.

See Fig. #2

for AC roughing-in dimension requirements.

* Urinal complies with ADA requirement when rim is mounted

no higher than 17" form finished floor.

No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137

8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA

NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC

1146969-T2-A

please leave instructions for the

TOUCHLESS WALL HUNG URINAL

1/2" NPT

2018)

GB 6952-2015 GB 28377-2019

528137

256410

110400

-1-

BARDON

INSTALLATION INSTRUCTIONS

K-4915T-2Y(0.5L)

K-4915T-2W(1L)

K-4915T-2(2.5L)

ASME

(A112.19.2-

432mm

POST CODE:

256410

POST CODE:

110400

2022

Need help?

Do you have a question about the BARDON K-4915T-2Y and is the answer not in the manual?

Questions and answers

Summary of Contents for Kohler BARDON K-4915T-2Y

Page 1 * Urinal complies with ADA requirement when rim is mounted 432mm no higher than 17" form finished floor. No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137 528137 8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA...
Page 2 610+ To Floor Outlet Details *610 2" N.P.S Tap Fig.2 Kohler reserves the right to change marked dimensions without prior notice. NOTE: Roughing-in dimension requirements for supply tubing as shown. · · 22-32mm Supply tubing is 22-32mm out of the wall. Otherwise. stop valve can not be installed and adjuested properly.
Page 3 INSTALLATION 1. MOUNT URINAL See Fig.#3 Install hangers per roughing-in illustration. Apply sealant tape to pipe threads and install female collar on waste pipe. Place washer on female collar. Install Urinal. Secure urinal to female collar with screws and washers. CAUTION: Risk of chipping or breaking urinal.
Page 4 Use DC or AC power unit as desired (not supplied). Refer to the installation instructions below. Use the Kohler specified AC or DC power supply. Any product damage or loss caused by the use of non-specified power supply shall be borne by the user.
Page 5 Install DC Power Unit (DC battery box K-29183T-NA needs to K-29183T-NA) be purchased separately) please refer to step 3 directly. Install AC Power Unit (AC power box K-16306T-NA needs to K-16306T-NA) be purchased separately), the way of installation is as below: CAUTION: a.
Page 6 3. INSTALL BATTERIES (Only for DC) See Fig.#10 Turn on stop valve. Inspect pipes for leakage in not flushing. Connect the connector of sensor window with the connector of solenoid valve. Remove the battery box cover and insert alkaline batteries into the battery box.Reinstall the cover of the baottery box and tighten it with battery box with screws.
Page 7 USER S GUIDE USER S GUIDE Don't use this system after 10 minutes power on. The induction distance will be adjusted and this system will not work during this time. The state of distance adjustment has been last about 10 minutes after power on.
Page 8 FLUSHING DURATION (Only for K-4915T-2) When first installed or during use, if the flushing volume is Flushing Control Stick reduced (due to low water pressure), the flushing duration can be adjusted. Power off until the indicator stops flashing. During the first 10 minutes after power on, approach the flushing control stick to the center of the sensor window for about 8 seconds.
Page 9 SENSOR SPECIFICATION SENSOR SPECIFICATION K-4915T-2Y(0.5L) Model K-4915T-2W(1L) K-4915T-2(2.5L) 2 piece of AAA sized alkaline batteries(DC) Power Supply 220V AC 50/60Hz(AC) Power Consumption The batteries can be used about two years(4000 times a month) Induction Distance Automatic adjustment according to the ambient circumstance Detection Duration About 2 seconds or 5 seconds (automatic adjustment) Double flushing(K-4915T-2)
Page 10 TROUBLESHOOTING Make sure to complete the procedures following before asking for repair: Symptoms Probable causes Corrective actions No flushing (indicator lamp 1. Batteries reversed. (only for DC) 1. Check the batteries. (Only for DC) 2. There are other objects are being detected. 2.
Page 11 Kohler inspection results. The product is designed not to hurt the environment. Under current technology, all hazardous materials have been used in the smallest amounts possible. Kohler will strive to reduce the use of these hazardous materials used in this product.
Page 12 (Hg) (Pb) (Cd) (Cr(VI)) (PBB) (PBDE) GB/T 26572 GB/T 26572 -12- 1146969-T2-A...

This manual is also suitable for:

Bardon k-4915t-2w Bardon k-4915t-2