Related Manuals for BOCCHI 1006 0125 Series
Summary of Contents for BOCCHI 1006 0125 Series
- Page 1 INSTALLATION INSTRUCTIONS BATHROOM SINKS - UNDERMOUNT Models: 1006-xxx-0125 1384-xxx-0125 www.bocchiusa.com Page 1 of 6...
- Page 2 • The cabinet and frame shown in these instructions are generic and may not represent the actual design or structure. • Due to the nature of fireclay sink installations, BOCCHI recommends that sink installations be performed by trained and experienced installers.
- Page 3 Installation Undermount Bathroom Sink • Unpack the sink and inspect for defects. If any questions call BOCCHI 877.565.2221 or email BOCCHI info@bocchiusa.com Paper Template OR Sink Trace • Use Scissors to cut along the line on the paper template. The template can be found on www.bocchiusa.com...
- Page 4 Install Anchors (cont.) If installing in wood countertop, use #10 wood screw for installation of the mounting bracket. • www.bocchiusa.com Page 4 of 6...
- Page 5 Installing the Sink • Run caulk/silicone around the top of the sink. • Check the fit of the sink to the cutout hole. • Place the sink over the cutout hole and press firmly. • Attach the mounting brackets and secure the sink. www.bocchiusa.com Page 5 of 6...
- Page 6 Installing the Sink (cont.) • Allow the caulk/silicone to set for at least 60 min before use (or as advised by your silicone manufacture). • Remove extra caulk/silicone from sink area. Installing the Plumbing Fixtures • Connect the drain and P-Trap to the sink. •...
Need help?
Do you have a question about the 1006 0125 Series and is the answer not in the manual?
Questions and answers