Advertisement
Quick Links
1
Appearance
NOTE: The pictures in the document are used to guide users to install/use, and may differ from the actual product. The specific
details shall be based on the actual product
No.
Item
1
2
3
4
5
6
Power Input
7
LAN Ports
8
USB Port
9
Telephone Port
10
Reset Button
11
Power Button
12
WPS Button
13
Standard SIM Card Slot
14
Wi-Fi External Antennas
15
4G External Antennas
Description
Blue: registered to 4G mobile network
•
Red: no-SIM card or not registered on the network
•
Blinking: Internet connection is setup and data transfer in progress
•
Green: LAN ports are connected
•
Blinking: data transfer
•
Blue: the device is powered ON
Blue: Wi-Fi on and data transfer in progress
•
Blinking: WPS connection set up in progress
•
More signal bars: stronger signal
DC adapter
10/100/1000Mbps automatic adapt
For debugging only
RJ11 port for connecting to regular analog telephone
Press for 3 seconds or above to restore to factory settings
Power on/off switch
To enable WPS function
2FF Standard SIM slot
2*Wi-Fi external antennas to improve the Wi-Fi performance
2* Wireless external antennas to improve the WAN performance
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MEIG SLT868Q
Summary of Contents for MEIG SLT868Q
- Page 1 Appearance NOTE: The pictures in the document are used to guide users to install/use, and may differ from the actual product. The specific details shall be based on the actual product Item Description Blue: registered to 4G mobile network • Red: no-SIM card or not registered on the network •...
- Page 2 Installation 1. Insert a standard SIM card first. Do not inset or remove SIM card when the router is running, as this may affect performance or damage the SIM card. 2. Connect cables and power on the device. Method 1: Wireless connection Method 2: Cable connection You can connect your computer or mobile phone You can access the internet through the LAN port.
- Page 3 Configuration You can access the WebUI and configure the device. You can refer to the CPE label on the backside of the CPE for the default IP address and password. It is strongly recommended that you change the default login password of the WebUI to prevent unauthorized users from changing the settings.
- Page 4 20cm spacing to any person at all times. EU Regulatory Conformance Statement Hereby, MeiG Smart Technology Co., Ltd. declares that the radio equipment type is in compliance with Directive 2014/53/EU. Frequency Band and Output Power The functions of Wireless Access Systems including Radio Local Area Networks (WAS/RLANs) within the band 5150-5850MHz for this device are restricted to indoor use only within all European Union countries (BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/IT/CY/LV/ LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/UK(NI)/TR/NO/CH/IS/LI).
Need help?
Do you have a question about the SLT868Q and is the answer not in the manual?
Questions and answers