Page 2
It is recommended to read all documents. Then, please check that all components are included in the delivery of the camera. Subject to update without notice. https://club.apexcam.com/manual/en/index.asp?id=31 If you have any questions, please contact our Customer Service Department at: supports@apexcam.com...
Page 3
Contents Security Measures ..................04 Preparations....................06 Component .......................06 Register for Warranty..................08 Charging the battery..................08 Formatting Memory Card..................08 Quick Guide.....................09 Power on and off....................09 Shooting......................10 Zoom.........................11 Selecting a Shooting Mode................12 WiFi........................13 Settings ......................15 Playback ......................18 Waterproof Case....................18 Remote control....................21 Waterproof Case....................22 Tips for using....................23 Update Firmware....................23 Battery Use Precautions..................23 Memory Card Precautions.................24...
Page 4
Security Measures Before using the equipment, please make sure you are familiar with its safety measures. If you see any malfunctioning equipment, please contact customer service: supports@apexcam.com Warning: Follow the instructions below to protect against fire, high heat, chemical leakage and electric shock.
Page 5
■ Keep the device out of reach of children and infants. Straps or cables may pose a choking, shock, or injury hazard to children. Swallowing camera parts or accessories may also pose a choking or injury hazard to children or infants. ■...
Page 7
Card Slot (built-in) Lanyard Hole Battery Compartment Working and Charging Indicators Tripod Screw Port Horn External Microphone/USB Cable Connector Microphone (built-in)
Page 8
Register for Warranty Apexcam M80 comes with a 2 year warranty. Please scan the QR code and activate the warranty before use. http://club.apexcam.com/clubwap.asp?action= Charging the Battery Charging the battery with cables Charging the battery with the charger Formatting Memory Card...
Page 9
Quick Guide Power on and off Press the power button to turn on the camera. Press and hold the power button to turn off the camera.
Page 10
Shooting Press the shutter in video mode to start or stop recording. Press the Mode button to switch between video mode and photo mode.
Page 11
Press the shutter in photo mode to take a picture. Zoom Press the Up button (Down button) to zoom in (out) in video or photo mode.
Page 12
Selecting a Photo Mode Press and hold the shutter to open the shooting mode menu. Press the Up or Down button to select the shooting mode...
Page 13
Press the Mode button to use the selected shooting mode. WiFi In video mode press and hold the Up button to enable the WiFi function. The SSID and password will then be displayed.
Page 14
Switch off mobile data and connect your phone and camera via WLAN. Now you can shoot videos and photos or download files via Live DV...
Page 15
Press the Up button to switch off WiFi. Settings Press the Mode button to Press the Mode button to open the menu. select a setting.
Page 16
Press the shutter to confirm. Press the Mode button to s elect the mode. Press the Up and Down buttons Press the shutter to confirm. to select the setting.
Page 17
Press the Up and Down buttons Press the shutter to confirm. to select the value. Press the Mode button to select Return.
Page 18
Press the Setup button to select Return. Playback Press the Mode button to open Press the shutter to confirm. the menu.
Page 19
Press the Up and Down buttons Press the shutter to play. to select the video. Press and hold the Up button Press the down button to select to delete the file. ‘Confirm’.
Page 20
Press the shutter to confirm. Press the Mode button to return. Press the Mode button again to return.
Page 21
Remote Control How to start/stop recording.
Page 22
How to take photos. Waterproof Case Open the black snap at the top of the Insert the camera. waterproof case. Close the back cover Close the black snap at the top of the tightly. waterproof case.
Page 23
Generally, the firmware does not need to be updated. If your camera is not working properly, sometimes the problem can be solved by updating the firmware.You can request the firmware by contacting our customer service department at supports@apexcam.com Battery Use Precautions This camera contains sensitive components such as batteries. Avoid ■...
Page 24
Memory Card Precautions While recording, use a branded memory card with sufficient ■ performance (fast enough read/write speed) to ensure recording quality and stability. The following memory cards can be used with the camera. 1) Micro SD, Micro SDHC, or Micro SDXC 2) Class 10 or UHS-I 3) Capacity up to 64 GB (FAT32) Format the memory card in the camera before use.
Page 25
Before using the waterproof case, please make sure that the waterproof ■ case is well sealed. If the white rubber seal becomes hard, deformed or damaged, please stop using the waterproof housing and contact us promptly for a new waterproof housing. Please dry the case after use, otherwise the metal buttons will get dusty ■...
Page 26
Troubleshooting What should I do if the camera and smartphone cannot establish a ■ WLAN connection? 1)Turn off mobile data first. 2) Then make sure the smartphone is connected to the camera's Wi-Fi network, as sometimes smartphones automatically connect to other Wi-Fi networks to which they were previously connected.
Page 27
How long does the battery last when recording video? ■ HD resolution: approx. 80 minutes 4K resolution: approx. 60 minutes The above figures refer to battery life without WLAN function and at normal ambient temperature. The remote control does not work. ■...
Page 28
Step 3: Lift the circuit board and slide out the battery as shown in the picture. Step 4: Insert the new battery, keeping the "+" post facing Step 5: Install all 4 screws back onto the board. Step 6: Re-install all 4 screws in the cover.
Page 29
3) If the problem still cannot be solved, please contact our customer service department to update the firmware or replace the remote control for you. Why are the time and date settings reset? ■ Since the camera cannot connect to the Internet to synchronise the time automatically, the time must be set manually.
Need help?
Do you have a question about the M80 and is the answer not in the manual?
Questions and answers