Sharp QW-GT43F413W-FR User Manual page 30

CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Inner Light option:
Machine must be ON position during activation and deactivation of inner light modes. Note: open or close
position of the door is not important
How to change from "ECO MODE" to "NORMAL MODE" for Inner Light option:
* First energize the machine via main switch (if it is in OFF position).
* First energize the machine via main switch (if it is in OFF position).
* Select "5. Eco mode" sub menu by using "up" and "down" buttons and press confirmation button to enter in
this sub menu.
* In "5. Eco mode" sub menu, select "Eco mode: NO" condition and press confirmation button to confirm
the selection. Now "Normal Mode" is selected for inner light option.
*After "Normal Mode" is selected, the inner light will be ON as long as the machine is energized and machine
door is open.
How to change from "NORMAL MODE" to "ECO MODE" for Inner Light option:
* First energize the machine via main switch (if it is in OFF position).
* Press Option (4)and Delay (5)buttons simultaneously for 3 seconds to enter the "Settings Menu".
* Select "5.Eco mode" sub menu by using "up" and "down" buttons and press confirmation button to enter in
this sub menu.
* In "5. Eco mode" sub menu, select "Eco mode: YES" condition and press confirmation button to confirm
the selection. Now "ECO Mode" is selected for inner light option.
*After "Eco Mode" is selected, the inner light will be ON for 4min after machine door is opened and then turns
OFF. If anyuser intervention occurs such as pressing buttons, Eco Mode cycle starts from beginning (inner light
is ON for 4min and then becomes OFF again)
Note: Factory setting for inner light are set to ''ECO MODE : YES''.
3 4 5
2
1
EN-30
6 7 8