Drain Hose Connection - Sharp Es-Gfc8144I3-En User Manual
Table of Contents
INSTALLATION
WATER SUPPLY CONNECTION
2
Screw the straight end of the hose clockwise to a 19mm (3/4'') cold water tap until hand
tight (fig 8). Take care not to trap or kink the hose.
Figure 8
DRAIN HOSE CONNECTION
Do not connect your Washing Machine to a surface water drain.
Connect your Washing Machine to your household drainage system (fig 9).
For your Washing Machine to function properly the outlet end of the drain hose must be at a
minimum of 0cm and a maximum of 100cm from the ground.
CAUTION:
Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed.
Do not attempt to extend the drain hose by adding extra sections.
13
T: 0333 577 7230
www.sharphomeappliances.com
Table of Contents
Need help?
Do you have a question about the ES-GFC8144I3-EN and is the answer not in the manual?