Advertisement
Quick Links
PORT
DSL
Connect to a telephone jack using a telephone wire.
LAN 10/100M
Connect to a computer using a crossover Ethernet cable or a hub using a straight-through cable.
POWER
Connect to a power source using the power adapter for your region (see your User's Guide).
Register your Prestige online at www.zyxel.com for free product updates and information.
LAN IP Address
Subnet Mask
1. Your user (account) name and password.
2. VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) integers.
3. Encapsulation (PPP, RFC 1483, ENET ENCAP or PPPoE).
4. Multiplexing method: LLC-based or VC-based.
5. You may need to know your Service Name if you are using PPPoE.
6. The IP address of the DNS (Domain Name System) server(s) and Gateway (if provided).
All computers must have a 10M or 100M NIC (Network Interface Card) and TCP/IP installed.
TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
Installing TCP/IP Components
1. Click Start, Settings, Control Panel and double-click the Network icon.
2. The Network window Configuration tab displays a list of installed components.
To install TCP/IP:
a.
In the Network window, click Add.
b. Select Protocol and then click Add.
c.
Select Microsoft from the list of manufacturers.
d. Select TCP/IP from the list of network protocols and then click OK.
Configuring TCP/IP
1. In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties.
2. Click the IP Address tab. Click Obtain an IP address automatically.
3. Click the DNS Configuration tab. Select Disable DNS.
4. Click the Gateway tab. Highlight any installed gateways and click Remove until there are none listed.
5. Click OK to save and close the TCP/IP Properties window.
Prestige 645 Read Me First
P
r
e
s
t
i
g
e
R
e
a
P
r
e
s
t
i
g
e
R
e
a
P
r
e
s
t
i
g
e
P
r
e
s
t
i
g
e
192.168.1.1
Default Password
255.255.255.0
DHCP IP Pool
I
n
t
e
r
n
e
t
A
I
n
t
e
r
n
e
t
A
P
r
e
p
a
r
i
n
P
r
e
p
a
r
i
n
These procedures are for dynamic IP addresses.
Set ting up You r Wind ow s 95 /98 /M e C omput er
r
P
a
n
e
l
C
o
n
n
e
c
t
i
r
P
a
n
e
l
C
o
n
n
e
c
t
i
CONNECTION
F
a
c
t
o
r
y
D
e
f
a
u
l
t
s
F
a
c
t
o
r
y
D
e
f
a
u
l
t
s
1234
192.168.1.33 – 192.168.1.64 (router model)
192.168.1.33 – 192.168.1.38 (modem model)
c
c
e
s
s
C
h
e
c
k
l
i
s
t
c
c
e
s
s
C
h
e
c
k
l
i
s
t
g
Y
o
u
r
N
e
t
w
o
r
k
g
Y
o
u
r
N
e
t
w
o
r
k
o
n
s
o
n
s
Advertisement
Related Manuals for ZyXEL Communications P-645R-A1
Summary of Contents for ZyXEL Communications P-645R-A1
- Page 1 Connect to a computer using a crossover Ethernet cable or a hub using a straight-through cable. POWER Connect to a power source using the power adapter for your region (see your User’s Guide). Register your Prestige online at www.zyxel.com for free product updates and information. LAN IP Address 192.168.1.1...
- Page 2 6. Click OK to close the Network window. 7. Turn on your Prestige and restart your computer when prompted. Insert the Windows CD if prompted. Verifying TCP/IP Properties 1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. 2.
- Page 3 Procedure For SMT Configuration via Telnet 1. Launch a Telnet program. In Windows, click Start and then Run. 2. Type “Telnet” followed by a space and the IP address of the Prestige, (192.168.1.1 is the default) and click OK to display the password screen.