Philips EVNIA 27M2N5501 User Manual page 7

2 Setting up the
monitor
2.1 Installation
1 Package contents
Power
*Different according to region
Quick Start
Register your product and get support at www.philips.com/welcome
HDMI DP
2 Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
27M2N5501
(2) Use your fingers to tighten the
(3) Gently attach the stand to the
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
5
stand.
screw located at the bottom of
the base.
VESA mount area until the latch
locks the stand.