Figure 15-2 Smt: Port Monitoring Configuration; Table 15-2 Smt: Port Monitoring Configuration - ZyXEL Communications Dimension ES-2008 User Manual

Port Mirroring State: Enable
Analysis Port: 1
Port
------------------------------------------
1.
2.
3.
Trk1.
Trk2.
0.
0.
0.
9.
actions->
Tab=Next Item

Figure 15-2 SMT: Port Monitoring Configuration

The Type field for port 9 varies depending on your switch model.
Follow the instructions in the table next to configure the fields in this screen.

Table 15-2 SMT: Port Monitoring Configuration

FIELD
Port Mirror Press [SPACE BAR] and [ENTER] to select YES to activate the port
State mirroring feature and set the related fields below.
Analysis Port Press [SPACE BAR] and [ENTER] to select a port number as the mirror
port.
Port This read-only field displays the trunk group number or port numbers for
ports not in a trunk group.
Note: This field is 0 to indicate that a port is in a trunk group.
Type This read-only field displays either 10/100 TX for Ethernet ports or 100FX
for the fiber port on the switch.
Switch Configuration
Dimension Switch ES-2008 : Port Mirroring Configuration
========================
Type
10/100TX
10/100TX
10/100TX
10/100TX
10/100TX
10/100TX
10/100TX
10/100TX
100FX
<Quit> <Edit>
Edit the mirroring configuration.
BackSpace=Previous Item
Dimension ES-2008 Ethernet Switch
Action
None
RX
TX
Both
None
None
None
None
None
<Save>
Space=Toggle
DESCRIPTION
Esc=Action menu
15-3